Category: Racing Parts
Price: $0
Part Fits: 93-02 Chevrolet Camaro, 93-02 Pontiac Firebird, Corvette, 04-06 Pontiac GTO, 04+ Cadillac CTS-V
Location (State): SC
Item Condition: Used
Shipping Information: Item Can be Shipped
Engine: LS1/LS6
LS Engine?: Fits LS Engine

LS6 intake and TB from 01'TA w/70K miles SOLD

Stock LS1 fuel injectors from 01'TA w/70K miles $sold

Comp 918 springs approx 20K miles. Came from same TA(new heads had new springs is why these are for sale) $sold

Stock 241 heads from 01'ta with 70K miles( springs are stock LS1 with 40K miles)$150



Stock 317 heads been cleaned and run for a few thousand miles, pulled has stock LS1 springs with 20K miles on them. $200



Headman coated LT's with y-pipe. Pulled from 01'TA has probably 50K miles on these. Starting to rust and some of the tubes are beat up(can take more pics if interested) upgraded to kooks stainless. $sold

LS1 stock camshaft. small nick on 1 journel. should be able to smooth it out. $20




F-body motor mounts came from same motor. has cracking. sold

Timing covers. Not sure of year models. both have been painted cast w/clear coat. would replace timing seals in either one. $30 each1 sold



SLP ls1 double roller timing chain used for about 12-15 dragstrip passes and no street miles. $115



Crane 7.250 .080 pushrods under 5K miles $75


CV products 7.100 pushrods 12-15 passes. no street miles 2 were lost and replaced with trickflow 7.100 $75



Stock LS1 pushrods 2 sets $20 each



7.200 2 piece pushrods(stock style) 1 set hardened(black)$25 (Silver)$20



Comp Cams used 7.800 hardened 1 piece pushrods. $75


Stock used LS1 thermostat and housing. $25 (have 2)



Stock used LS1 timing chain and gears have 3 all look good. $30 each.



Stock used LS1 lifter trays. 4 sets1 sold $10 each



LS1 rear cover 1 early style, 1 late styleSOLD

Main caps out of a 98 corvette LS1. $75



5.3 flexplate not sure on year or mileage $20



5.3 intake,fuel rails,TB, cover $100

 

Comp 918's are sold

 

weekend bump

 

On sent on headers / y

 

lots of interest but no money yet

 

i need a rear cover. i have a 01 camaro m6 and putting a lq4 based 6l init. so i need the rear cover that fits the 6l. its pre 04

 

the rear cover I have left will work they are interchangable. as are the ones for the LS1's or LQ motors. They are all the same. just a different casting. the rear seal is the same.

 

headers sold

 

im looking at another one one here for 15 bucks. if that falls through can you go ahead and send me your paypal i can seed soon if he dont have his anylonger at 15 bucks

 

Sent PM with info.

 

1 timing cover and injectors sold.

 

rear cover sold

 

241 heads are pending

 

up top

 

up top

 

new shipped price on the intake

 

intake pending payment.

 

Intake sold, TB still for sale

 

TB pending

 

TB sold