Used 7.4 pushrods, 853 heads, stock cam, Oil Pump, MAF, Valley cover
12-19-2011, 08:08 PM
#1
TECH Fanatic
Thread Starter
iTrader: (8)
Join Date: Dec 2002
Location: Syracuse, NY
Posts: 1,349
Likes: 0
Received 0 Likes
on
0 Posts
Used 7.4 pushrods, 853 heads, stock cam, Oil Pump, MAF, Valley cover I have some used parts that I would like to get rid of. All prices are Best offer. Need to get rid of them so I can rebuild my motor.
LS1 853 heads, 86,000 miles, never been off the car till now. Have dual springs on them from the cam swap. $125
Trickflow 7.4" hardended pushrods, 15,000 miles, not bent. $50 SOLD
Stock LS1 cam. Has 72,000 miles on it, also have stock springs and pushrods. $50
Used Texas speed oil pump, was ran during engine problems so metal was ran thru it, doubt it hurt it. $50
LS1 Valley cover and coolant tubing. $50
Stock MAF for LS1. $50
LS1 853 heads, 86,000 miles, never been off the car till now. Have dual springs on them from the cam swap. $125
Trickflow 7.4" hardended pushrods, 15,000 miles, not bent. $50 SOLD
Stock LS1 cam. Has 72,000 miles on it, also have stock springs and pushrods. $50
Used Texas speed oil pump, was ran during engine problems so metal was ran thru it, doubt it hurt it. $50
LS1 Valley cover and coolant tubing. $50
Stock MAF for LS1. $50
