Category: Engine - Intake/Fuel
Price: $65
Part Fits: 93-02 Chevrolet Camaro, 93-02 Pontiac Firebird
Location (State): VA
Item Condition: Used
Shipping Information: Item Can be Shipped
Engine: LS1/LS6
LS Engine?: Fits LS Engine
Selling a used aftermarket lid I had as a spare to replace my clear lid when I ran at the track. I have come across another lid that needs some repair and will be using it instead, so I am selling this one for those that are in need of one. This is an SLP style but not the smooth exterior like the SLP. It has the air temp gauge in the lid. This lid is also the non AIR style lid, so no need to plug a hole. Clean lid, I have used it before at the track with no problems, ran a 12.73 in the 1/4 with this lid. Now it does have some damage to it, but it has been repaired and does not effect performance. A prior owner either pushed the MAF too far into the lid and cracked the bottom outer rim, or purposely cut it for some reason. When I got the lid the broken/cut piece was still apart, so I used some epoxy plastic weld to fix it (See pics below). As you can see in the pics the epoxy is a cream color, and can be seen on the inside. I did sand the epoxy down some on both sides and used some high temp enamel to paint the outer to look a little better and hide the fix. It is hard to see the repair from the outside, plus it's on the bottom. I am asking for $65 shipped on this. Let me know if you need better pics of any part of the lid or the repair.
06-12-2012, 11:00 AM
Aftermarket lid, SLP style 
