Category: Racing Parts
Price: $1200
Part Fits: 2010+ Camaro, 93-02 Chevrolet Camaro, 93-02 Pontiac Firebird, Corvette, 04+ Cadillac CTS-V
Location (State): PA
Item Condition: Used
Shipping Information: Item Can be Shipped
Engine: LS2/LS3/LS7/L92/LS9
LS Engine?: Fits LS Engine

I am selling the top end off my LQ4 6.0L. The heads are LS3 castings with the stock valves and Patriot valve springs. The Intake is a dual plane from GM Performance. The MSD controller is Part #6010 and it comes with the software to tune it. The cam is part number 54-469-11 and at idle it stumbles around a bit but it pulls all the way up to 6500 rpms or more. All of these parts are in good shape and have less than 2500 miles on them. The reason I am selling all this stuff is I am going a different route with fuel injection and the cam is a little too much for my taste. lol

The LS3 heads and MSD Controller are SOLD!

I also have a 800 cfm Holley Double Pumper Carb I was going to put on it but never got to it for an extra $170 plus shipping.

If you have any questions, please ask! Thanks!

http://paceperformance.com/i-6255547...-manifold.html

http://www.summitracing.com/parts/CCA-54-469-11/

http://www.summitracing.com/parts/msd-6010

 

How much for the intake and the carb?

 

How much for the heads and rockers?

 

qnitro: I forgot to mention that the carb has been sitting around for awhile and I really dont know the jets that are in it. So it would probably need gaskets. but $500 for both.

BBC632Camaro: $550

 

how much for the 6010 msd box?
Thanks

 

6.0 1955: I would take $200 plus shipping. Comes with everything you would get if you bought it new.

 

Here are some pics of the parts. The heads are 821 castings. They come with the offset rockers only.

 

Chances are I will be losing power because of hurricane sandy for a few days. Hopefully not, but in case I do I thought I should let you know... lol

 

do you still have the 6010 and just confirming this works with the 24 tooth reluctor wheel? is it the one pictured on the inner fender? and is the programmable one... i dont know much about these, but i asked cause the one in the link appears to look different than the one in your picture, but i think the 6ls is what i need?

 

LSCustoms: yes this is for the older reluctor wheel. And yes it is pictured on the inner fender and is programmable. Yeah the one in the link is black... but it is the same thing.

The LS3 heads are SOLD!

 

Here are a few pictures of the MSD box and the Carb. The list number for the carb is 4780.

 

Pm me a price on carb, intake, and msd setup please. Thanks

 

PM sent

 

Money sent for the 6010

 

The MSD 6010 is Sold!

 

Cam is Sold! The Intake and Carb are the only parts left.

 

Intake and carb are for sale here: https://ls1tech.com/forums/parts-cla...l#post16893718