This stuff needs to go or it goes to the dump
02-16-2006, 10:34 PM
#1
This stuff needs to go or it goes to the dump Have a stock 99-00 LS1 camshaft out of a fbody looks great. $25 + shipping OBO.
Have a stock LS1 lifter valley cover make an offer. SOLD
Also have a stock LS1 camshaft sprocket. In good shape. Make an offer.
Stock LS1 rods and pistons. Came out of a motor that had bearing damage. Only have 28k on pistons. Torqued all the rod bolts down and checked the big ends of the rods. They all checked out 2.224 and 2.225 which is right on factory spec. Not a machinist so I would have these rechecked but even if one or two rods need to be resized or replaced this is a killer deal. $100 + shipping OBO.
Set 99-00 LS1 knock sensors these retail for about $60 each at your local GM dealer. $50 + shipping for the pair.
Have a stock LS1 lifter valley cover make an offer. SOLD
Also have a stock LS1 camshaft sprocket. In good shape. Make an offer.
Stock LS1 rods and pistons. Came out of a motor that had bearing damage. Only have 28k on pistons. Torqued all the rod bolts down and checked the big ends of the rods. They all checked out 2.224 and 2.225 which is right on factory spec. Not a machinist so I would have these rechecked but even if one or two rods need to be resized or replaced this is a killer deal. $100 + shipping OBO.
Set 99-00 LS1 knock sensors these retail for about $60 each at your local GM dealer. $50 + shipping for the pair.
Last edited by kossuth; 02-18-2006 at 08:46 AM.
