FS: Built 4L65E and Vig 3200 verter
Transmission built by Texas Best Transmissions in Arlington. It has 2000 miles on it. Should hold 600rwhp with no problems. Bought off a board member and have decided that I need a 4L80E or TH400 to go behind my turbo motor. Never made it to my car.
4L65E 5 pinion planetery set
4L65E Input Sprag
Beast sunshell with reaction shaft 4L65E bearing
Wide band HD Kevlar
Banner kit master/with Koleen steels / HD red clutches
HD center support
Capsual for release on servo
1-2 Super servo with rubber viton sealing rings
Cryogenicly hardened input and output shaft
4th gear Super Servo with dual piston
Pinless accumulator pistons
Z-pack (3-4) 14 one sided clutches
Stiffener plate
Transgo shift kit
wiring harness
All new solenoids
Bushing & Bearing kit
Deep pan
$1000 shipped SOLD
Vig 3200 converter
$350 shipped
PayPal prefered.
Trans is secured to a pallet and wrapped up ready to go.
Pics below.
4L65E 5 pinion planetery set
4L65E Input Sprag
Beast sunshell with reaction shaft 4L65E bearing
Wide band HD Kevlar
Banner kit master/with Koleen steels / HD red clutches
HD center support
Capsual for release on servo
1-2 Super servo with rubber viton sealing rings
Cryogenicly hardened input and output shaft
4th gear Super Servo with dual piston
Pinless accumulator pistons
Z-pack (3-4) 14 one sided clutches
Stiffener plate
Transgo shift kit
wiring harness
All new solenoids
Bushing & Bearing kit
Deep pan
$1000 shipped SOLD
Vig 3200 converter
$350 shipped
PayPal prefered.
Trans is secured to a pallet and wrapped up ready to go.
Pics below.
Last edited by wickedred; Apr 11, 2006 at 03:24 PM.
Not sure on the mileage of the verter. It was in my car when I bought it.
I will get some pics of the tranny and send them. It looks like a stock 4l60E that has been anodized metallic blue. It ,ay take a day or so to get the pics.
I will get some pics of the tranny and send them. It looks like a stock 4l60E that has been anodized metallic blue. It ,ay take a day or so to get the pics.
Trending Topics
do you know anything on the converter? Since it was in the car do you know for sure it's a 3200? I will give you 300 shipped, scares me a bit you're not sure of the milage.
Not sure what shipping is on these. I'm in Iowa 52722 if you want to check it out. I will buy it.
Not sure what shipping is on these. I'm in Iowa 52722 if you want to check it out. I will buy it.
I am sorry it scares you about the mileage. I will not sell it for less than $350. I am giving it away at that price. The guy i got the car from had it installed and told me specifically is was a 3200 stall. I had no problem what so ever with the convertor. it stalled to 3000 or so on the brake and street tires and would flash to 3800 or so when you punched it from a roll.






