SPEC stage 5i disc with barely any miles on it. I went 1.44 sixty foot with this and about three mid ten passes. But it would not hold nitrous because the PP was resurfaced and did not get reshimmed. It would hold 550 rwhp but not 800. The disc is about new and Mics out to about .001 thicker than a new SPEC stage 5 (this one is a 5i). 5i is a sprung hub and makes this clutch very streetable.

This clutch would probably hold a very aggressive heads and cam car...or just buy the disc and get a new SPEC Pressure plate to handle 700+ rwhp.

Ill take $75 for the disc and another $40 for the PP plus $15 shipping.
Pics of the disc:









AC compressor and bracket from a 2000 vette with 36k miles on it. It came off the motor that is currently in my car. $60 shipped.

 

up for the evening

 

Do you know if that's the same compressor that an F-body uses? Texas is getting ready to hit the spray on the hot-ness.

 

yep...same compressor...the bracket is likely different but of you have yours you should be good to go.

 

Schweet. I'll take it! .... And you can keep the bracket as a paper-weight.

Paypal ok? Which email addy should i send it to?

 

PM sent