Cleaning out garage - Wheels, Tires, EFI Singleplane Intake, Dash, etc
4th Gen Garage Sale - PICS (2) 245/50 16" Nitto DRs with 20% tread left - $50
(2) 245/50 16" Kumho Ecsta 711s, not the nasty looking 712s
. BRAND new, no miles, mounted on salad shooters -$150
OEM LT1 SS Spoiler painted teal - $200 pickup only
Single plane intake converted to EFI with wilson elbow. Intake is a Vic Jr. #2975 and will work with LT1/LT4/AFR heads. Will need to figure out your own bolt holes for your heads, but the hard part is already done. PM/Email for details on what else you'll need. This intake will fit under a stock Fbody hood. 650
More pics of intake
http://community.webshots.com/photo/...7911918hYMTZi#
Hedmann 1.875 -> 3.5" headers with 4" Ypipe. Stahl bolt pattern, includes adaptors, etc. $500
Racetronix Fuel pump, harness, and sending unit good to 550rwhp NA: 150 Shipped
Bad pic, but shows some of the sending unit (I'm including everything)
97+ Ebony Dash, 97 Gauge cluster, bezels, a/c vents - $200 pickup
Dash cap - $50 pickup
Lower console - 50
LT1 Scanmaster - $150
Install guide I made for dash:
http://www.cardomain.com/ride/345879/3
2 Front Bose Speakers/1 Bose subwoofer. Sounds great, but when I went to remove the speakers I found 1 speaker with a hole in them. 35
Cutout - 30 Shipped
I'm in Houston, TX.
If you want something, I will allow 7 days to get payment to me. If want to come pick something up, I will hold it after payment has been made in full.
Ryan
(2) 245/50 16" Kumho Ecsta 711s, not the nasty looking 712s
. BRAND new, no miles, mounted on salad shooters -$150OEM LT1 SS Spoiler painted teal - $200 pickup only
Single plane intake converted to EFI with wilson elbow. Intake is a Vic Jr. #2975 and will work with LT1/LT4/AFR heads. Will need to figure out your own bolt holes for your heads, but the hard part is already done. PM/Email for details on what else you'll need. This intake will fit under a stock Fbody hood. 650
More pics of intake
http://community.webshots.com/photo/...7911918hYMTZi#
Hedmann 1.875 -> 3.5" headers with 4" Ypipe. Stahl bolt pattern, includes adaptors, etc. $500
Racetronix Fuel pump, harness, and sending unit good to 550rwhp NA: 150 Shipped
Bad pic, but shows some of the sending unit (I'm including everything)
97+ Ebony Dash, 97 Gauge cluster, bezels, a/c vents - $200 pickup
Dash cap - $50 pickup
Lower console - 50
LT1 Scanmaster - $150
Install guide I made for dash:
http://www.cardomain.com/ride/345879/3
2 Front Bose Speakers/1 Bose subwoofer. Sounds great, but when I went to remove the speakers I found 1 speaker with a hole in them. 35
Cutout - 30 Shipped
I'm in Houston, TX.
If you want something, I will allow 7 days to get payment to me. If want to come pick something up, I will hold it after payment has been made in full.
Ryan
Last edited by 96-speed; Jun 20, 2006 at 11:55 AM.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
