My SS vs 25psi vs 450rwhp 04 Cobra
#1
12 Second Club
Thread Starter
iTrader: (10)
Join Date: Mar 2003
Location: Sugarland Texas
Posts: 2,001
Likes: 0
Received 0 Likes
on
0 Posts
My SS vs 25psi vs 450rwhp 04 Cobra
Well we finally went out and did it, we had another guy in a DSG 04 Cobra join too. Basically it was My SS(sig), vs PE TT 350Z 7-8psi vs 04 Cobra 2.8 pulley, exhaust, CAI and dyno tune.
We did 1st gear and 2nd gear rolls. The 1st few runs camera guy was in my car and the 350z would edge me out up top, we did that a few times and pulled over to talk, his car is 100% legit, runs HARD as ****.
After that we put the camera man in his car and did the same ****, 45-50 rolls down hwy 59, on one race I hit 150, lol. Basically it was even, I had a slight edge like he did when I had the camera guy Id say it is a 100% dead even race. We both ran the cobra about the same, dead even. In fact, I would like to see 3 cars get together and race this close, it was almost funny how even it was.
I am doing the TSP ls6 budget heads, FAST 90/90 and asp pulley, he is gonna forge his motor and run 15lbs. Should be some more good vids of us running pretty soon.
Vids will be up later tonight, gotta convert some ****.
http://video.ls1tech.com/video/be841...4c4f5fffd2.htm
We did 1st gear and 2nd gear rolls. The 1st few runs camera guy was in my car and the 350z would edge me out up top, we did that a few times and pulled over to talk, his car is 100% legit, runs HARD as ****.
After that we put the camera man in his car and did the same ****, 45-50 rolls down hwy 59, on one race I hit 150, lol. Basically it was even, I had a slight edge like he did when I had the camera guy Id say it is a 100% dead even race. We both ran the cobra about the same, dead even. In fact, I would like to see 3 cars get together and race this close, it was almost funny how even it was.
I am doing the TSP ls6 budget heads, FAST 90/90 and asp pulley, he is gonna forge his motor and run 15lbs. Should be some more good vids of us running pretty soon.
Vids will be up later tonight, gotta convert some ****.
http://video.ls1tech.com/video/be841...4c4f5fffd2.htm
Last edited by Sprayed1998; 06-18-2006 at 04:52 PM.
#3
12 Second Club
Thread Starter
iTrader: (10)
Join Date: Mar 2003
Location: Sugarland Texas
Posts: 2,001
Likes: 0
Received 0 Likes
on
0 Posts
well this video **** is pissing me off, anybody know how to convert MOV to MPEG AVI or WMV. Ima get to sleep, ill have to deal with this **** tomorrow after work.
#6
12 Second Club
Thread Starter
iTrader: (10)
Join Date: Mar 2003
Location: Sugarland Texas
Posts: 2,001
Likes: 0
Received 0 Likes
on
0 Posts
Yea, the cobra had a passenger, usually we are dead even. I got a few more runs on vid, ill get em up later. We ran ALOT, but most of the vids were shitty or the camera man left the damn camera on forever after the race.
Trending Topics
#11
12 Second Club
Join Date: Jun 2005
Location: Kansas City, MO
Posts: 1,275
Likes: 0
Received 0 Likes
on
0 Posts
I am doing the TSP ls6 budget heads, FAST 90/90 and asp pulley
#12
Originally Posted by c5_ls1_6spd
how much was that turbo 350Z making to the wheels?
His car really pulled hard surprised the **** out of me. To be honest, I think both of our cars are slightly faster than that cobra on the top end.
#13
12 Second Club
Thread Starter
iTrader: (10)
Join Date: Mar 2003
Location: Sugarland Texas
Posts: 2,001
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by BLACKNREDSS
good call, although im a lil partial. our cars are a lot alike, same appearance and engine mods for the most part. nice runs man.
#14
12 Second Club
Thread Starter
iTrader: (10)
Join Date: Mar 2003
Location: Sugarland Texas
Posts: 2,001
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 25psi
At 6.5 psi which is what the kit comes with, I made 412rwhp. I was running 7-8 psi yesterday.
His car really pulled hard surprised the **** out of me. To be honest, I think both of our cars are slightly faster than that cobra on the top end.
His car really pulled hard surprised the **** out of me. To be honest, I think both of our cars are slightly faster than that cobra on the top end.
#18
12 Second Club
Thread Starter
iTrader: (10)
Join Date: Mar 2003
Location: Sugarland Texas
Posts: 2,001
Likes: 0
Received 0 Likes
on
0 Posts
Yea, spray is very tempting, but if I poped the motor now, id be pulling out a loan, and I hate loans. Plans for right now (like this month) are to throw and LS6 manifold and pulley on the car. That would put me at cam/full bolt-ons, and prob 420-425rwhp. Ill see how the car runs like that and if im not impressed ill throw down on those TSP LS6 heads. But when this motor goes (it will the way i drive it) it's gonna be forged with ALOT of gas.