M6 swap parts
M6 swap parts, 5.3 block, Misc stuff I am currently about halfway through swapping an A4 into my trans am so I have most of the stuff you will need for an M6 swap ready to go.
-Stage III T56: needs a 1-2 synchro and a pilot shaft bearing/seal but otherwise operates normally. It is rated for 600 flywheel HP, has numerous upgrades including C/F synchro rings and the steel 3/4 shiftfork. I paid close to $2000.00 plus a core for it, asking $850 since it needs work
-T56 Bellhousing: **SOLD**
- M6 crossmember $30.00
- Centerforce Dual friction clutch with billet steel flywheel: Just past it's break in period, it has 320 miles on all parts, includes ARP flywheel bolts and ARP pressure plate bolts $400.00
- Z06 slave cylinder: Also has 320 miles on it, **SOLD**
- Ram adjustable master cylinder with reservoir: has 11,000 miles on it, works great **SOLD**
- Pro 5.0 shifter with Lou's short stick (T56): **SOLD**
- M6 brake/clutch pedal: $50.00
- Billet WS6 Pedal set (M6): $45.00
- Hurst T-handle shift ****: Satin finish $25.00
- M6 console top: Black, mint condition $40.00
- M6 Torque arm mount:Bushings are drilled out for an aftermarket poly bushing $10.00
More to come
Also have
-4.8/5.3 block: Hot tanked, Mag'd, bored .030 over,Painted black, new cam bearings installed $225.00
- Autometer 4327 Oil Pressure gauge: Ultralite series (silver faace black numbers) brand new in box. $40.00
- Autometer 4374 Nitrous pressure gauge with sender - retails for $220.00, asking $175.00
PRICES DO NOT INCLUDE SHIPPING!
Pics can be had upon re-quest, stuff will be going onto Ebbay on Monday and then it will be up for auction, so act fast if you see something you want!
PM me here with questions or E-mail to nickbrehm@msn.com
-Stage III T56: needs a 1-2 synchro and a pilot shaft bearing/seal but otherwise operates normally. It is rated for 600 flywheel HP, has numerous upgrades including C/F synchro rings and the steel 3/4 shiftfork. I paid close to $2000.00 plus a core for it, asking $850 since it needs work
-T56 Bellhousing: **SOLD**
- M6 crossmember $30.00
- Centerforce Dual friction clutch with billet steel flywheel: Just past it's break in period, it has 320 miles on all parts, includes ARP flywheel bolts and ARP pressure plate bolts $400.00
- Z06 slave cylinder: Also has 320 miles on it, **SOLD**
- Ram adjustable master cylinder with reservoir: has 11,000 miles on it, works great **SOLD**
- Pro 5.0 shifter with Lou's short stick (T56): **SOLD**
- M6 brake/clutch pedal: $50.00
- Billet WS6 Pedal set (M6): $45.00
- Hurst T-handle shift ****: Satin finish $25.00
- M6 console top: Black, mint condition $40.00
- M6 Torque arm mount:Bushings are drilled out for an aftermarket poly bushing $10.00
More to come
Also have
-4.8/5.3 block: Hot tanked, Mag'd, bored .030 over,Painted black, new cam bearings installed $225.00
- Autometer 4327 Oil Pressure gauge: Ultralite series (silver faace black numbers) brand new in box. $40.00
- Autometer 4374 Nitrous pressure gauge with sender - retails for $220.00, asking $175.00
PRICES DO NOT INCLUDE SHIPPING!
Pics can be had upon re-quest, stuff will be going onto Ebbay on Monday and then it will be up for auction, so act fast if you see something you want!
PM me here with questions or E-mail to nickbrehm@msn.com
Last edited by Batman WS-6; Jun 30, 2006 at 06:21 AM.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
