WTB Wheel Spacers
Trending Topics
I have 1/4" spacers for ya, you wont need to get bigger wheel studs, but if you go with 1/2" spacers you will need to get longer studs and they wont be as sturdy.
If I was you, I would either go with the 1/4" spacers or go with the 1" wheel adapters where you have to lug those on your existing wheel studs and then tighten the wheel on the adapters.
I use the 1" adapters and I think it looks great and have had no p roblems with them.
If I was you, I would either go with the 1/4" spacers or go with the 1" wheel adapters where you have to lug those on your existing wheel studs and then tighten the wheel on the adapters.
I use the 1" adapters and I think it looks great and have had no p roblems with them.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo will they cause any fender rub at all? I had 1 inch wheel spacers on my eagle 16x8 alloy not lowered with the stock springs set up and it rubbed quite a bit...any bump i hit and everything...Now i have 18x9.5 chrome C6 rims and its lowered about 1.75 with bilstein springs shocks and canuck motorsports lowering springs...I think i would have to stick with the 1/4 spacer..How much would you charged shipped to 72034? And how many do you have?
