SLP Loudmouth for trade...
Thread Starter
TECH Fanatic
iTrader: (15)
Joined: Apr 2005
Posts: 1,058
Likes: 0
From: West Seneca, NY
SLP Loudmouth for trade... I have the SLP Loudmouth 1 exhaust, and i just put some long tubes + ORY on my car, so i want to trade for something a little more quiet. I'm not picky anything that will fit up to a 3 inch y pipe is fine with me cept for flowmaster. The SLP is already off the car, in two pieces right now for easy shipping... i did not cut it, sepearated at the factory joint. The previous owner of this exhaust did cut it, and i had that welded back together. Pics show the weld area. 3 1/2 slash tips. On the bottom of the tip there is a couple scrapes but they are not noticable when the exhaust is on the car. Also took photo's of this. If someone is local to buffalo that would make this alot easier, but shipping is no problem, we would just have to figure that out... looking for a straight up trade... or 200 plus shipping to send it out
[IMG]
[/IMG]
[IMG]
[/IMG]
[IMG]
[/IMG]
[IMG]
[/IMG]
**** Welding Pics ****
[IMG]
[/IMG]
[IMG]
[/IMG]
[IMG]
[/IMG]
**** Tips Pics ****
[IMG]
[/IMG]
[IMG]
[/IMG]
[IMG]
[/IMG]
[IMG]
[/IMG]
**** Factory Joint where the exhaust was seperated ****
[IMG]
[/IMG]
[IMG]
[/IMG]
************************************************** ********
Let me know what you have... or if you have any other questions... best to shoot me a pm
EDIT: wheelchair not included
[IMG]
[/IMG] [IMG]
[/IMG] [IMG]
[/IMG] [IMG]
[/IMG] **** Welding Pics ****
[IMG]
[/IMG] [IMG]
[/IMG] [IMG]
[/IMG] **** Tips Pics ****
[IMG]
[/IMG] [IMG]
[/IMG] [IMG]
[/IMG] [IMG]
[/IMG] **** Factory Joint where the exhaust was seperated ****
[IMG]
[/IMG] [IMG]
[/IMG] ************************************************** ********
Let me know what you have... or if you have any other questions... best to shoot me a pm
EDIT: wheelchair not included
Last edited by 98_Formula; Nov 22, 2006 at 06:05 PM.
Teching In
Joined: Sep 2006
Posts: 9
Likes: 0
From: Pittsburgh, Pa
Originally Posted by 98_Formula
I have the SLP Loudmouth 1 exhaust, and i just put some long tubes + ORY on my car, so i want to trade for something a little more quiet. I'm not picky anything that will fit up to a 3 inch y pipe is fine with me. The SLP is already off the car, if someone is local to buffalo that would make this alot easier, but shipping is no problem, we would just have to figure that out... looking for a straight up trade...
Let me know what you have...
Let me know what you have...
Thread Starter
TECH Fanatic
iTrader: (15)
Joined: Apr 2005
Posts: 1,058
Likes: 0
From: West Seneca, NY
still looking for a trade, yes i will sell it 200 plus shipping or jsut make an offer shipped to save some time... i got a couple offers for stock catback, i don't want stock exhaust i have my stock which might end up going on there... but i'm looking for a quiter aftermarket cat back, or possible trades / partial trades for ls1 items... please check my sig for stuff i already have...
edit...
also would trade or partial trade for trans am rear bumper, ram air hood, subthump/thunderform etc
edit...
also would trade or partial trade for trans am rear bumper, ram air hood, subthump/thunderform etc
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
i can trade u even up, for a flowmaster catback with chrome tails, it will need to be welded back into place, cut in 2 places 2 shipp easier, cut before the axle and 5inchs off the muffler. can get pic's
Thread Starter
TECH Fanatic
iTrader: (15)
Joined: Apr 2005
Posts: 1,058
Likes: 0
From: West Seneca, NY
bump I still got this laying around... i would trade for the hooker straight up, if you want a cutout for the slp loudmouth i can include one...
... not really looking for a flowmaster setup...
... not really looking for a flowmaster setup...
Can you send pics? Did you weld any of it like the resonator?
I have a magnaflow catback that I'm getting tips put on some time this week. The muffler has some scuffs on it from the previous owner being a turd but she still flows really good and was on the car when I dynoed (check sig).
I'm looking to make a magnamough so let me know something.
I have no problem shipping. I haven't welding anything.
I have a magnaflow catback that I'm getting tips put on some time this week. The muffler has some scuffs on it from the previous owner being a turd but she still flows really good and was on the car when I dynoed (check sig).
I'm looking to make a magnamough so let me know something.
I have no problem shipping. I haven't welding anything. Thread Starter
TECH Fanatic
iTrader: (15)
Joined: Apr 2005
Posts: 1,058
Likes: 0
From: West Seneca, NY
Originally Posted by Justin00SS
Can you send pics? Did you weld any of it like the resonator?
I have a magnaflow catback that I'm getting tips put on some time this week. The muffler has some scuffs on it from the previous owner being a turd but she still flows really good and was on the car when I dynoed (check sig).
I'm looking to make a magnamough so let me know something. I have no problem shipping. I haven't welding anything.
I have a magnaflow catback that I'm getting tips put on some time this week. The muffler has some scuffs on it from the previous owner being a turd but she still flows really good and was on the car when I dynoed (check sig).
I'm looking to make a magnamough so let me know something.
I have no problem shipping. I haven't welding anything.i think shipping to hawaii might cost more than just buying the exhaust!!!!!
Originally Posted by 98_Formula
i think shipping to hawaii might cost more than just buying the exhaust!!!!!
So no. Shipping wouldn't be $400.
By the way I just got tips put on it. https://ls1tech.com/forums/multimedia-exchange/612126-new-exhaust-clip.html
Why was it welded?
Thread Starter
TECH Fanatic
iTrader: (15)
Joined: Apr 2005
Posts: 1,058
Likes: 0
From: West Seneca, NY
Originally Posted by Justin00SS
Magnaflow catbacks are $400 not including shipping.
So no. Shipping wouldn't be $400. By the way I just got tips put on it.
https://ls1tech.com/forums/showthread.php?t=612126
Why was it welded?
So no. Shipping wouldn't be $400.
By the way I just got tips put on it. https://ls1tech.com/forums/showthread.php?t=612126
Why was it welded?
ha i was referring to my exhaust not the magnaflow... but give me your zip code and i'll find out how much it would cost to ship... pm with what kinda of deal you wanted to work out.
The only reason the exhaust was welded was becuz the previous owner cut it when he removed it from his car
... i just had it welded back together b4 i put it on my car. I'm not really sure any more right now man. Give me the weekend to think it over. I am leaning towards just getting a cut out right now and being done with it. lol
my zip code by the way is 96734 and how long can you go without exhaust? I can go maybe a day or two max. My neighbors, cops, or both would be on my *** real quick. lol
my zip code by the way is 96734 and how long can you go without exhaust? I can go maybe a day or two max. My neighbors, cops, or both would be on my *** real quick. lol
Thread Starter
TECH Fanatic
iTrader: (15)
Joined: Apr 2005
Posts: 1,058
Likes: 0
From: West Seneca, NY
well right now i have my stock catback put on my car, so the slp loudmouth isnt on my car. so i wouldnt have to go without exhaust for any period of time. i did drive home after my headers and y pipe were on my car, no catback.... it was a 20 minute drive but my 02's were all screwed up so my car kept backfiring so it sounded completly retarted. once the car was in overdrive, aside from the drone, it wasnt as bad as i thought it would be... now starting out after being stopped at a light or something it was pretty obnoxious... i wouldnt wanna be doing that on a daily basis at all. not sure how long shipping would take to hawaii from buffalo... let me know what u wanna do, my plan was to put a cutout in my y pipe so i can be loud when i want and quiet when i want, but the stock exhaust is just TOO quiet, i need a little louder for cruising, but not loudmouth loud...