01 ws6 For Sale in Illinois!
01 ws6 For Sale in Illinois! I thought i would start a new thread, so here it is. its an 01 ws6 that has 31,6xx miles. im asking $21.5k for it. ur choice of stock 01 ws6 rims or the one's u see in the pics. the car has never been sprayed or has ever seen snow except today when i took out for the pics only. hears a list of the mods the car has:
Engine: MTI clear Lid, K&N Filter, NGK Tr6's, MSD 8 mm wires, Racetronix fuel pump & 42lb Injectors, TB By-Pass, 160 T-Stat, G5x3 114, PRC Dual Spings, CM Pushrods, ASP Crank Pulley, Pacesetter LT headers w/Ory, Borla adjustable catback with electric cutout, FAST 90 mm intake w/ NW 90mm TB, Harland Sharp roller rockers 1.7, thunder racing maf ends, nos 5177 kit(which i never even finish installing) with bmn gear lockout controller
Trans: Pro 5.0 Shifter, Spec 3 clutch, Harlan Shift Light.
Chassis/suspension: All BMR- STB, SFC's, LCA's, Adj. PHB, Adj. Torque Arm, D/s Loop, hal 12 way adj shocks package. Moser 12 bolt/ 4.10
Wheels/Tires sportmax 962 with nitto 555r on the rear tires, SLP Linelock,
appearancedynotune nitrous pressure gauge, dynotune nitrous switch gauge, Interceptor scan gauge, blackbird stripes, fuel rail covers.
i think that it but im sure i'm missing other things, if u guys have any ?'s let me know! thanks for looking
Engine: MTI clear Lid, K&N Filter, NGK Tr6's, MSD 8 mm wires, Racetronix fuel pump & 42lb Injectors, TB By-Pass, 160 T-Stat, G5x3 114, PRC Dual Spings, CM Pushrods, ASP Crank Pulley, Pacesetter LT headers w/Ory, Borla adjustable catback with electric cutout, FAST 90 mm intake w/ NW 90mm TB, Harland Sharp roller rockers 1.7, thunder racing maf ends, nos 5177 kit(which i never even finish installing) with bmn gear lockout controller
Trans: Pro 5.0 Shifter, Spec 3 clutch, Harlan Shift Light.
Chassis/suspension: All BMR- STB, SFC's, LCA's, Adj. PHB, Adj. Torque Arm, D/s Loop, hal 12 way adj shocks package. Moser 12 bolt/ 4.10
Wheels/Tires sportmax 962 with nitto 555r on the rear tires, SLP Linelock,
appearancedynotune nitrous pressure gauge, dynotune nitrous switch gauge, Interceptor scan gauge, blackbird stripes, fuel rail covers.
i think that it but im sure i'm missing other things, if u guys have any ?'s let me know! thanks for looking
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Looking at your car Hello. Is your car demodded yet? I'm in the market for an f-body, have already been pre-approved, and I'm looking. You're car is beautiful and has lots of mods that I would plan to do anyway. I'm in the military down in South Carolina, so Illinois is a LONG haul. I have a few questions for you. Has your car been garage kept? It looks really good. Any problems with the paint at all? Has the internal engine ever been touched...heads or cam. I'm looking for perfect paint...no swirl marks, scratches, or dents. Any problems at all with the car? Has the drill mod been done w/ your clutch install? If your car turned out to be the one for me, I would need to have it with everything initially listed in your post. Thank you for your time. Also, would you be willing to let it go for $19,000. I am serious and would not waist your time. Let me know. Thanks.
Carlos
Carlos
Originally Posted by Comin' Thunder
Hello. Is your car demodded yet? I'm in the market for an f-body, have already been pre-approved, and I'm looking. You're car is beautiful and has lots of mods that I would plan to do anyway. I'm in the military down in South Carolina, so Illinois is a LONG haul. I have a few questions for you. Has your car been garage kept? It looks really good. Any problems with the paint at all? Has the internal engine ever been touched...heads or cam. I'm looking for perfect paint...no swirl marks, scratches, or dents. Any problems at all with the car? Has the drill mod been done w/ your clutch install? If your car turned out to be the one for me, I would need to have it with everything initially listed in your post. Thank you for your time. Also, would you be willing to let it go for $19,000. I am serious and would not waist your time. Let me know. Thanks.
Carlos
Carlos
this car has been taken care of immaculately. i have personally detailed it once and can do it again, if needed.
i can post pictures of the car when i detailed it if you would like
