lt1 cam swap for sale
lt1 cam swap for sale --------------------------------------------------------------------------------
-Comp Cams TN230XL Camshaft 230/236 duration @ .050", .544/.555" lift 112lsa. (1000 miles)
- Springs Suitable to .600" with locks and retainers (1000 miles)
-1.6 comp roller rockers 3/8 with 300 miles with lock nuts (non self aligning)
-(new) comp cam 7.200 pushrods in box
-new edelbrock guide plates 5/16ths
-new 3/8 studs for pushrods
- (used) march underdrive pulley with shorter gator belt
-(new) felpro timing cover gasket set
-(new) felpro valve cover gasket set
-(new) intake manifold gasket set
get everything for 450 obo plus shipping. i'll even throw in a (New)free set of race car wire looms for 7mm & 8mm
emergency came up and need to sell asap!
-Comp Cams TN230XL Camshaft 230/236 duration @ .050", .544/.555" lift 112lsa. (1000 miles)
- Springs Suitable to .600" with locks and retainers (1000 miles)
-1.6 comp roller rockers 3/8 with 300 miles with lock nuts (non self aligning)
-(new) comp cam 7.200 pushrods in box
-new edelbrock guide plates 5/16ths
-new 3/8 studs for pushrods
- (used) march underdrive pulley with shorter gator belt
-(new) felpro timing cover gasket set
-(new) felpro valve cover gasket set
-(new) intake manifold gasket set
get everything for 450 obo plus shipping. i'll even throw in a (New)free set of race car wire looms for 7mm & 8mm
emergency came up and need to sell asap!
Last edited by clamato96lt1; Jul 20, 2007 at 11:17 PM. Reason: updated springs listing
im interested in the rockers if you seperate as well. you have any pics, if you do send some to gromero15@yahoo.com
Why did you take out the cam? Is it a hyd roller or solid? Is this an off the shelf cam or custom? Did you ever dyno the motor with this cam? If so, where did peak TQ and Peak HP occur? What was your idle quality like? Was this cam/motor in an A4 car or M6? What did you like about it and what did you NOT like about it? I've got a custom Cam Motions Hyd Roller that is around 244 dur @ .050 and .598 lift I took out of one of my LT1's. It was a good cam but I'd like something a little less aggressive since my daughter is driving the car now.
i was slowly buying this stuff to do my cam swap but since an emergency came up i must sell. family comes first. i never got a chance to put this on.
not seperating yet guys. i know someone wants this setup and 450 obo is a steal
not seperating yet guys. i know someone wants this setup and 450 obo is a steal
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
