Built Th-400
I am switching to a Powerglide so I have no need for the 400 anymore, It was built by Dana at Probuilt automatic to handle 1000+ HP. The transmission has less than 1500 miles on it and performes flawlessly, it has the normal forward shift pattern, it has an extra deep Derale pan, and has always been ran with a tranny cooler. It has a flexible dipstick tube on it right now that I will let go with it and I also have an extra filter and gasket that I'll let go to.
I had this tranny in my car and only made about 5 passes on it with a best of 10.49 @ 131 with no problems whatsoever.
I would prefer not to ship it and could possibly meet someone halfway if they aren't too far away. Please PM me if you are interested since this section moves so quick.
It is located in eastern Kentucky.
Asking 1000.00 OBO
I may do trade plus $$$ let me know what you have.
Thanks.
I had this tranny in my car and only made about 5 passes on it with a best of 10.49 @ 131 with no problems whatsoever.
I would prefer not to ship it and could possibly meet someone halfway if they aren't too far away. Please PM me if you are interested since this section moves so quick.
It is located in eastern Kentucky.
Asking 1000.00 OBO
I may do trade plus $$$ let me know what you have.
Thanks.
Trending Topics
Well it makes it tought to sell a product when you preferably won't ship! I might be interested if you would, but its far for me. If it were right infront of me, well that changes things. I'd probably have it installed by now
Joined: Jul 2007
Posts: 1,500
Likes: 177
From: ELSA, South TEXAS (956) 802-7700
question. does the th400 bolt up to an ls motor (6.0l) or is a special adapter required? if so, who makes such adapter? thanx.
rob (low2001gmc@aol.com)
rob (low2001gmc@aol.com)






