Moser 12 bolt fs, lots of upgrades
Moser 12 bolt fs, lots of upgrades I have a Moser 12 bolt for sale. It fits 82-02 F-body. It is in excellent condition and is ready to go. The housing is 3 years old. All of the internals are new with less than 100 miles. We changed directions and went to a Burkhart 9" so this has to go. Here is what it has:
New Moser 33 spline axles
New Detroit Tru-Trac
New 3.89 gears
New bearings throughout
Setup for 3 channel ABS with sensor and reluctor ring
Billet 1350 yoke
Aluminim girdle cover
1/2 x20 x3" wheel studs
BMR sway bar brackets welded on
Custom made lower control arm relocation brackets. These have more adjustment than you can get with any other on the market. Made from T1 Duramax alloy, lighter and stronger than CM, two extra adjustment holes aligned to keep the geometry correct. Done by a chassis shop.
Extended spring locators so you can run coil spring spacers without losing containment of the spring.
Lowered Panhard bar mount to correct geometry on lowered cars.
I will post pics tomorrow.
I would prefer pick up but will crate it for you at no extra charge if you arrange shipping. Paypal fee is included in the price. This rear would be over $2400 new plus the custom brackets.
$1855 PM or email me for more info. I will provide a phone # if you need to talk. Thanks.
New Moser 33 spline axles
New Detroit Tru-Trac
New 3.89 gears
New bearings throughout
Setup for 3 channel ABS with sensor and reluctor ring
Billet 1350 yoke
Aluminim girdle cover
1/2 x20 x3" wheel studs
BMR sway bar brackets welded on
Custom made lower control arm relocation brackets. These have more adjustment than you can get with any other on the market. Made from T1 Duramax alloy, lighter and stronger than CM, two extra adjustment holes aligned to keep the geometry correct. Done by a chassis shop.
Extended spring locators so you can run coil spring spacers without losing containment of the spring.
Lowered Panhard bar mount to correct geometry on lowered cars.
I will post pics tomorrow.
I would prefer pick up but will crate it for you at no extra charge if you arrange shipping. Paypal fee is included in the price. This rear would be over $2400 new plus the custom brackets.
$1855 PM or email me for more info. I will provide a phone # if you need to talk. Thanks.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
