Hello,
I am looking to sell my stock ls1 longblock. I just pulled it out of my 1999 Trans Am with 42k miles. Nothing wrong at all, just upgraded to a forged bottom w/ different heads and such. The motor has no problems, ran like a champ. Is a complete longblock minus some covers,sensors, accessories. Will not come with valvecovers, oil pan, front cover, rear cover, intake. It will come with the valley cover and front/rear cover GASKETS, no covers. ... The motor was boosted for 2k miles, 5 psi of boost intercooled and sprayed meth, tuned by W2W very safe. Ran like a champ, never had any issues, motor is in great shape! It made 420/413 so the motor was not pushed at all with the set up, very safe. Looking for Local Sale. I am located in Port Huron, MI which is about an hour north of Detroit. Can arrange pick up, and will meet/deliver within a reasonable amount. If your not in the area and are interested, PM me and we can work something out. Any other questions or picture requests feel free to ask. Currently the engine is in shortblock form and needs the 4 head dowel pins before i can bolt the heads down, but it has brand new head bolts and gaskets here waiting to be installed. Will sell as short OR longblock for the right price. If you want the longblock it will be assembled, but is currently in the shortblock form for anyone interested. $1250 for shortblock, $1750 for longblock. Shipping will be on the purchaser if needed. Also have a 4l60-e that is ready to rock n' roll as well with Converter! Add this to your purchase for $550

 

Going to transfer the covers and such over to my new motor today so i will post pictures up later tonight of exactly what you will be getting! Thanks

 

so all it would need is heads, covers and an intake??

mike

 

No, it comes with heads, and the intake. Just needs covers Im going to put the oil pan and such on my new motor now and put the heads back on and will get pictures up tonight hopefully of exactly what you will be getting But it comes assembled with heads and the true fire intake

 

Bump!

 

Bump for the evening! Will entertain serious offers or a possible trade.

 

Bump for the morning people!

 

Back up!

 

If only you were closer.

 

Can work something out if your willing to pay for shipping, LMK

 

Bumpppp

As of right now the engine is in shortblock form, the heads are off still assembled. The cam, timing set, and oil pump are back on the shortblock. I need to pick up 4 of the head dowel pins, some head bolts and gaskets and it will be a longblock again.

 

Back up for the weekend!

 

Bump for Sunday!

 

Bump it up

 

Back up. Will entertain offers if someone would like the shortblock and ill part the top end, if i get a decent offer before its built back to the longblock!

 

How much for the shortblock? Dont need cam/lifters/covers/oil pan.
Scott
grsdup1@aol.com

 

Shoot me a PM with an offer on it and i'll crunch the numbers and see what i could do on the shortblock.

 

OBO! If i get someone seriously interested, i will get it assembled to the longblock ASAP.

i also have a stock 4l60-e transmission with stock torque converter if you need a trans as well. The trans will need a new pump however.

BUMP!

 

Never heard back from u on the shortblock. Do you have a price for just the block & rotating assy? I dont need anything else.
Scott

 

I returned the PM to you i thought.... you said you sent an e-mail which didnt go through because i still had my old e-mail address on here. Shoot me an offer for what your looking for. PM is the best way to get ahold of me. Thanks!