BMR TH400 Crossmember & NBS Silverado/Sierra Catback
Thread Starter
TECH Resident
iTrader: (15)
Joined: Jun 2003
Posts: 787
Likes: 0
From: Traverse City, MI
BMR TH400 crossmember for 98-02 LS1 f-bodies. Powdercoated black.
SOLD
NBS Silverado/Sierra Catback. This is off of my 04 Silverado ECSB. It is the stock catback with a Flowmaster 30 series welded in place, as well as a 3.5" rolled lip stainless tip welded on. 30 series isn't too common and sounds really deep/mellow/smooth from the outside, not as loud as 40 series, but you can definitely hear it, and isn't overbearing inside like most Flowmasters. All in one piece, not cut.
SOLD
All items are used and sold as-is.
SOLD
NBS Silverado/Sierra Catback. This is off of my 04 Silverado ECSB. It is the stock catback with a Flowmaster 30 series welded in place, as well as a 3.5" rolled lip stainless tip welded on. 30 series isn't too common and sounds really deep/mellow/smooth from the outside, not as loud as 40 series, but you can definitely hear it, and isn't overbearing inside like most Flowmasters. All in one piece, not cut.
SOLD
All items are used and sold as-is.
Last edited by Birdie2000; Feb 10, 2008 at 10:26 PM.



