L"SS"1

iTrader: (14)

What I have for sale is a Exedy twin disk your ls1 camaro or corvette. The flywheel has just been freshend up and the clutches were checked and the disks have about 80% life left which with this clutch is plenty of life. I installed it in my car but decided to run a th400 instead. After installing the clutch I literally backed it out of the garage and drove it down the street and thats all the run time its had on it since it came back from the machine shop. I purchased a shim to go behind my slave cylinder to make up for the machine work done to the flywheel which I will send with it. The construction of this clutch is awesome and its alot lighter than my old centerforce single disk setup. This clutch is almost 2000 new, I would like to get 750 out of it plus shipping obo. Let me know if you have any questions.

[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]

L"SS"1

iTrader: (14)

This is OBO...I am also looking for a body mount torque arm if somebody would like to make a partial trade.

L"SS"1

iTrader: (14)

Ok then how does 699 sound and I will split shipping with you.....I want this gone

CaMaRo67RS355

iTrader: (75)

so how many miles is on it?

Speed

iTrader: (33)

PM Sent

L"SS"1

iTrader: (14)

I was told around 10k when I bought it. PM's returned, thanks!

L"SS"1

iTrader: (14)

ttt...

L"SS"1

iTrader: (14)

ok....650 and split shipping

L"SS"1

iTrader: (14)

well hell I guess I will just throw it away then

El_Diablo

iTrader: (9)

throw it in my garage biyatch! J/k...Good luck with the sell man. Seller is a good guy people.

CaMaRo67RS355

iTrader: (75)

you can throw it to me... im interested but debating what i want to do right now as fas as what clutch setup etc.

L"SS"1

iTrader: (14)

Hah...I was going to throw it in the dumpster behind your house but I can throw it in your garage for ya lol. What clutch are you running in the Z right now? It would fit real snug between that motor and tranny in your beast

Camaro67...pm me an offer you may be surprised.

El_Diablo

iTrader: (9)

I'm still rocking the spec 3+ and billet steel flywheel. 17 or 18K on it and still rockin. We'll see how long it lasts with the 325/50s and 1.5 or better short times though.

L"SS"1

iTrader: (14)

Well then how does everybody feel about 600?

L"SS"1

iTrader: (14)

pm's replied

L"SS"1

iTrader: (14)

Sale pending to 1sickws6

CaMaRo67RS355

iTrader: (75)

let me know if it falls through

Martin HD-28

iTrader: (16)

I have an 02 ss that's more of a cruiser but I like to eat mustangs here and there, pushing around 410rwhp. Is this more of a race clutch or a street clutch?