made it into the single digits 1st time out
#1
TECH Apprentice
Thread Starter
iTrader: (1)
Join Date: Oct 2013
Location: sonoma ca
Posts: 309
Likes: 0
Received 0 Likes
on
0 Posts
made it into the single digits 1st time out
well it surprised me but first time out with the combo I put together made it. I knew it had the potential but was kind of surprised all the same. I only was able to make one run because the cage isn't cert'd yet and im not licensed yet..
so on a soft leave to see if it would hold a t brake at 3k leave it did, I have the two step set at 3500 with a 3600+ stall so there is more left to be had. Also I have the gate opening at 12psi but obviously I was overpowering the gate to get the mph..
a vid if you have fb
https://www.facebook.com/photo.php?v=10202020528691889
so on a soft leave to see if it would hold a t brake at 3k leave it did, I have the two step set at 3500 with a 3600+ stall so there is more left to be had. Also I have the gate opening at 12psi but obviously I was overpowering the gate to get the mph..
a vid if you have fb
https://www.facebook.com/photo.php?v=10202020528691889