S95 Mustang 370/S480/Th400 9.90s off the trailer
11-05-2016, 02:00 PM
#1
Launching!
Thread Starter
iTrader: (1)
Join Date: Jun 2012
Location: Daytona Beach
Posts: 265
Likes: 0
Received 0 Likes
on
0 Posts
S95 Mustang 370/S480/Th400 9.90s off the trailer https://ls1tech.com/forums/carburete...lly-added.html
Hey guys! Above is the original thread to my build. I just made the first track pass in it the other night since selling my SBE 5.3 nitrous setup and switching to turbo. Iron block 370 rods/pistons, Untouched 317s, LJMS custom cam, Pac .650s/ super vic, CSU dual needle and seat E85 blow through Carb.
UPDATE!!!
Hey guys well its been a while for this thread but I finally made it to the track! Straight off the trailer the car went 9.90 @141 with a soft 1.50 60'. This was on 12-14lbs, 15* of timing and 10.2 AFR at Wot! So much more left in the tuneup! I could have went down 2-4 jet sizes in the rear to get the AFRs where they needed to be. Also, this was only turning the motor 6400! The motor can turn 7-7200 all day with the valvetrain it has. I never even popped the hood that night lol. track saw I had no cage and said GTFO LOL! here's a video!
Hey guys! Above is the original thread to my build. I just made the first track pass in it the other night since selling my SBE 5.3 nitrous setup and switching to turbo. Iron block 370 rods/pistons, Untouched 317s, LJMS custom cam, Pac .650s/ super vic, CSU dual needle and seat E85 blow through Carb.
UPDATE!!!
Hey guys well its been a while for this thread but I finally made it to the track! Straight off the trailer the car went 9.90 @141 with a soft 1.50 60'. This was on 12-14lbs, 15* of timing and 10.2 AFR at Wot! So much more left in the tuneup! I could have went down 2-4 jet sizes in the rear to get the AFRs where they needed to be. Also, this was only turning the motor 6400! The motor can turn 7-7200 all day with the valvetrain it has. I never even popped the hood that night lol. track saw I had no cage and said GTFO LOL! here's a video!
11-09-2016, 08:25 PM
#3
Launching!
Thread Starter
iTrader: (1)
Join Date: Jun 2012
Location: Daytona Beach
Posts: 265
Likes: 0
Received 0 Likes
on
0 Posts
Thanks man! looking to get the cage in soon so I can go back and let her eat! I think pulling some jet and getting my suspension ironed out will hopefully get me in the 9.50s!