383 turbo build quistions/ suggestions
#1
On The Tree
Thread Starter
iTrader: (10)
Join Date: Jul 2008
Location: norwich ny
Posts: 113
Likes: 0
Received 0 Likes
on
0 Posts
383 turbo build quistions/ suggestions
so im building a 383 sbc single turbo to most likely go into a fox body rustang
my build ideas so far are wiseco forged pistons with a 20cc dish, a forged crank for 6" rods, 6" h beams, and i have either afr 210 heads or dart 220 race heads that are fully ported both have around 70-72 cc chambers... any suggestions on the bottom end and head choice?
turbo will be a s400 victor jr intake and custom blowthrough carb...
the part that has me a little confused is the igntion system i dont know which way to go i have a msd crank trigger setup but was looking more into an electronic distributor like the e curve
again any thoughts or suggestions is appreciated and if anyone has done a similar setup please share your setup
my build ideas so far are wiseco forged pistons with a 20cc dish, a forged crank for 6" rods, 6" h beams, and i have either afr 210 heads or dart 220 race heads that are fully ported both have around 70-72 cc chambers... any suggestions on the bottom end and head choice?
turbo will be a s400 victor jr intake and custom blowthrough carb...
the part that has me a little confused is the igntion system i dont know which way to go i have a msd crank trigger setup but was looking more into an electronic distributor like the e curve
again any thoughts or suggestions is appreciated and if anyone has done a similar setup please share your setup
#5
On The Tree
Thread Starter
iTrader: (10)
Join Date: Jul 2008
Location: norwich ny
Posts: 113
Likes: 0
Received 0 Likes
on
0 Posts
im doing this without spending a ton of money i have the pistons and i already have the dart 220 race heads and afr 210's ... so the 227's are out sorry
but what else do you recommend with the crank trigger? a msd boost retard box and a 6al?
but what else do you recommend with the crank trigger? a msd boost retard box and a 6al?