800 HP SB-2 how fast - LS1TECH

Go Back   LS1TECH > SBC-BBC-LT1-LT4 PERFORMANCE > Small Block & Big Block Chevy Specific
Log In 
Search


Small Block & Big Block Chevy Specific Mouse & Rat Motor Discussion & Conversions


800 HP SB-2 how fast

Reply
 
Thread Tools Search this Thread
Old 08-27-2009, 08:54 AM   #1
Staging Lane
 
slooter's Avatar
 
Trader Rating: 0
Join Date: Jun 2008
Location: Burford Ontario
Posts: 70
Default 800 HP SB-2 how fast

I have a 2000 camaro.... weighs in at 3230 with driver
Just installed 800 hp 368 sb-2 motor
Bowtie block with roller cam bearings 4.152 bore
6.050 titanium GRP rods
Custom Cola crank 3.400
Custom JE pistions14.5 to one
Custom built solid roller cam shaft 814/768
Jessel rocker system,
SB-2 Nascar heads,Titanium valves flows 402
1.85,1.80 rocker arms
Carls....Competition trans , custom converter
10.5 tire 9in 410 rear 35 spline axles
Made 798 hp at 7800 rpms,and 567 TQRQ at 6600 rpms

Just want to know what I'm looking at for ET's
Thanks Tony
Attached Thumbnails
800 HP SB-2 how fast-im000308.jpg   800 HP SB-2 how fast-im000309.jpg   800 HP SB-2 how fast-im000310.jpg  
__________________
EX.....LS1Tech.com car.....Pinkinstein
1966 chev pick up 11.40 @114mph 1.5360ft
2000 camaro Z28 10.80's on motor @126mph
2002 camaro SS 12.57 @109.5mph 1.9460fts
2006 duramax diesel 13.90 @ 98 mph
1969 camaro SS 572 crate with 785 hp
2000 camaro 800 hp SB2.2 9.80's @140mph
with mild tune.
slooter is offline   Reply With Quote
Old 08-27-2009, 09:51 AM   #2
TECH Enthusiast
 
hotrodscrap's Avatar
 
Trader Rating: 10
Join Date: Jan 2008
Location: Texas/Somewhere in Southwest Asia
Posts: 639
Default

Nice motor, where can someone get an SB-2? Gl, it ought to be a quick car!

-SS
__________________


1925 Ford roadster p/u build IW w/ 409 W-motor / 1985 Chevy S10 race truck, back halfed w/ 9", LSx swap IW / 1994 9C1(Cloned) Impala SS, 6-speed, bolt on's / 2007 Silverado Classic RCSB / 2006 Cummins 3500, hauler
Not doing crap right now but working in Kuwait!

***Daily driver: Dual Suspension Mongoose Mtn. Bike, work to tent in under 12:00*** -SS

Last edited by hotrodscrap; 08-27-2009 at 01:36 PM.
hotrodscrap is offline   Reply With Quote
Old 08-27-2009, 10:28 AM   #3
10 Second Club
 
BassProCamaro97's Avatar
 
Trader Rating: 10
Join Date: Jun 2007
Location: Wauconda IL
Posts: 499
Default

800 at the rear wheels or fly wheel?

What did you do to get that thing so light? I'm trying to get mine to 3000lb sans myself.

~Jim~
__________________
1969 Camaro
1997 427 SBC Camaro
10.67 ET /1.45 Sixty/ 126 MPH

My Camaro build:
http://www.ls1tech.com/forums/small-...27-camaro.html
BassProCamaro97 is offline   Reply With Quote
Old 08-27-2009, 12:40 PM   #4
TECH Senior Member
 
NemeSS's Avatar
 
Trader Rating: 125
Join Date: Sep 2005
Location: Houston,TX
Posts: 6,752
Default

Quote:
Originally Posted by slooter View Post
I have a 2000 camaro.... weighs in at 3230 with driver
Just installed 800 hp 368 sb-2 motor
Bowtie block with roller cam bearings 4.152 bore
6.050 titanium GRP rods
Custom Cola crank 3.400
Custom JE pistions14.5 to one
Custom built solid roller cam shaft 814/768
Jessel rocker system,
SB-2 Nascar heads,Titanium valves flows 402
1.85,1.80 rocker arms
Carls....Competition trans , custom converter
10.5 tire 9in 410 rear 35 spline axles
Made 798 hp at 7800 rpms,and 567 TQRQ at 6600 rpms

Just want to know what I'm looking at for ET's
Thanks Tony
only one way to find out!
keep us posted
NemeSS is offline   Reply With Quote
Old 08-27-2009, 03:13 PM   #5
10 Second Club
 
Trader Rating: 16
Join Date: May 2009
Location: Miami, FL
Posts: 434
Default

Quote:
Originally Posted by slooter View Post
I have a 2000 camaro.... weighs in at 3230 with driver
Just installed 800 hp 368 sb-2 motor
Bowtie block with roller cam bearings 4.152 bore
6.050 titanium GRP rods
Custom Cola crank 3.400
Custom JE pistions14.5 to one
Custom built solid roller cam shaft 814/768
Jessel rocker system,
SB-2 Nascar heads,Titanium valves flows 402
1.85,1.80 rocker arms
Carls....Competition trans , custom converter
10.5 tire 9in 410 rear 35 spline axles
Made 798 hp at 7800 rpms,and 567 TQRQ at 6600 rpms

Just want to know what I'm looking at for ET's
Thanks Tony
I love SB2's! Depending on how much hp is lost through the drive train I'd say your looking at between 9.70 @ 140 - 9.40 @ 144 based on a et calculator I found online.

http://www.race-cars.net/calculators/et_calculator.html

Also depends on the amount of error built into this calculator. Either way your car will be flyin!
__________________
-98 SS 10.004 @ 135.48-
Daily Driver
Sofls1 is offline   Reply With Quote
Old 08-27-2009, 06:18 PM   #6
In-Zane Moderator
 
ZONES89RS's Avatar
 
Trader Rating: 23
Join Date: Jan 2007
Location: Conroe, Texas
Posts: 10,614
Default

It will depend on the rest of the setup. That bore and stroke is for higher end screaming for rolling 200 MPH on a roundy pound, not to mention the torque tells it all. Not a dead stop quarter pounder. But it will run depending on where you stall it and what hears. It hs no choice but to move.
__________________

BUILT NOT BOUGHT
80 Coupe 6.0 TH400
86 TA 5.3, 4L80
92 S10 ECSB 4.8 T56
Quote:
Originally Posted by -Ross- View Post
Haw mut horzpowa sbc or lsx eenjun mayk b4 eet need tarbo liked da 2jz?
ZONES89RS is online now   Reply With Quote
Old 08-27-2009, 09:30 PM   #7
Staging Lane
 
Trader Rating: 0
Join Date: Oct 2007
Posts: 53
Default

Did you boost the motor from a Nascar??
rednari is offline   Reply With Quote
Old 09-02-2009, 09:36 AM   #8
Staging Lane
 
slooter's Avatar
 
Trader Rating: 0
Join Date: Jun 2008
Location: Burford Ontario
Posts: 70
Default Sb-2

Quote:
Originally Posted by rednari View Post
Did you boost the motor from a Nascar??
NO........! i bought it from a couple of FBI agents ,who ran the motor in a 69 camaro.This motor was set up for drag racing......went 9.20 @2900 lbs with mufflers.

Tony
__________________
EX.....LS1Tech.com car.....Pinkinstein
1966 chev pick up 11.40 @114mph 1.5360ft
2000 camaro Z28 10.80's on motor @126mph
2002 camaro SS 12.57 @109.5mph 1.9460fts
2006 duramax diesel 13.90 @ 98 mph
1969 camaro SS 572 crate with 785 hp
2000 camaro 800 hp SB2.2 9.80's @140mph
with mild tune.
slooter is offline   Reply With Quote
Old 09-02-2009, 04:01 PM   #9
TECH Apprentice
 
slingshot928's Avatar
 
Trader Rating: 0
Join Date: Aug 2006
Posts: 368
Default

i want to see what this runs due to the sb2 set up for N/A power is awesome
__________________
1993 Z28 A4 Burgundy/Black hardtop, A few boltons
slingshot928 is offline   Reply With Quote
Reply

Similar Threads
Thread Thread Starter Forum Replies Last Post
LSX parts forged pistons,TI valves,fast injectors ss_454 Parts Classifieds 2 06-25-2013 06:49 PM
SB2.2 Build?? charlie6178 Small Block & Big Block Chevy Specific 13 09-09-2009 08:03 PM
Tested a NASCAR LS2 dmc454 Dynamometer Results & Comparisons 19 11-05-2007 03:30 PM
adjusting adjustable roller rockers on LS1? Abdullah Generation III Internal Engine 8 08-23-2007 09:06 PM
Setting valve lash Midnight Small Block & Big Block Chevy Specific 7 06-04-2005 06:48 PM


Tags
572, 800, bearings, block, cam, camaro, cams, heads, hp, motor, motors, sale, sb, sb2, sb22, small


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are Off


 

All times are GMT -5. The time now is 12:15 PM.


Powered by vBulletin® Version 3.8.7 AC2
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
Advertising - Terms of Service - Privacy Statement - Terms of Service - JOBS
Emails & Contact Details