poncho 4th gen
01-11-2008, 06:37 PM
#1
Teching In
Thread Starter
Join Date: Jan 2008
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
poncho 4th gen anyone have info on doing a pontiac motor in 4th gen f-body. I got a bad *** poncho short block and a 96 formula i just sold lt-1 out of and was gonna go BBC but would rather go full poncho. I don't wanna hear ditch it and go BBC just any info on the swap would be appreciated
thanks guys
thanks guys
01-11-2008, 10:24 PM
#2
TECH Fanatic
iTrader: (2)
Join Date: Nov 2006
Location: Aztec, NM
Posts: 1,360
Likes: 0
Received 0 Likes
on
0 Posts
The heads are going to be tight at best in the car, especially if you have A/C. Even in the 68' GTO I just finished, the headers are a nightmare, there is very little room. You might want to do some measuring before getting too far into this project. You may not want to hear it, but a BBC would be a walk in the park next to the challenge you are about to undertake putting in a 389/400/455.
