My 95 383 TPIS miniramed T-56 Turbo S-10
Trending Topics
#15
Staging Lane
iTrader: (12)
Join Date: Mar 2009
Location: Eddyville, KY
Posts: 78
Likes: 0
Received 0 Likes
on
0 Posts
Looks good,hopefully you can get enough air into the radiator to keep cool? I've got a question for ya please, what brake master is that? I have a hydro-boost conversion I put on mine from an astro van and used a G30 van master and my brakes stop fine, just has a very hard pedal "almost 0" travel, and I think it is in the master because my proportional valve is basically useless for my rear disc, seems to make no difference when adjusted.
Thanks,
Thanks,
#17
12 Second Club
Thread Starter
iTrader: (1)
Join Date: Apr 2007
Location: Ft. Wayne, IN
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
Looks good,hopefully you can get enough air into the radiator to keep cool? I've got a question for ya please, what brake master is that? I have a hydro-boost conversion I put on mine from an astro van and used a G30 van master and my brakes stop fine, just has a very hard pedal "almost 0" travel, and I think it is in the master because my proportional valve is basically useless for my rear disc, seems to make no difference when adjusted.
Thanks,
Thanks,
#19
12 Second Club
Thread Starter
iTrader: (1)
Join Date: Apr 2007
Location: Ft. Wayne, IN
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
Thanks, Those things were such a pain in the butt. Plus I just tacked everything together and had someone tig them together. Took a lot of time to make those things how I wanted to. I probably would just flip some manifolds around if I did it all over again
#20
Staging Lane
iTrader: (12)
Join Date: Mar 2009
Location: Eddyville, KY
Posts: 78
Likes: 0
Received 0 Likes
on
0 Posts
I was pretty sure from your picture it was an Astro van hydroboost, but the polished aluminum master cylinder is what I was curious came from?? Looks like an aftermarket one?
Last edited by Alvisracn; 04-06-2009 at 08:41 PM. Reason: sp