Lookin for stock ls1 engine parts in N. AL
10-05-2007, 03:21 PM
#1
Teching In
Thread Starter
iTrader: (1)
Join Date: Apr 2007
Posts: 43
Likes: 0
Received 0 Likes
on
0 Posts
Lookin for stock ls1 engine parts in N. AL Tryin to piece together a motor as cheap as possible.Stock minus a good cam with a "stockish" idle.Will prob. end up in a '94 ranger.100% sleeper.Need EVERYTHING-block,rot. assem.,heads,manifolds,inj.,harness,blah,blah,blah .Thanks alot.
10-07-2007, 04:27 PM
#4
I have a 98 LS1, I took out of my Formula. The engine ran great and put down 330 hp with a set of long tube headers. The engine has 91 thousands miles and had never been removed the car. The parts that are missing are the throttle body, starter, altern, belt assem and coil packs. The waterpump, oil pan, heads, intake, injectors and crank pulley are on the engine.
All of the sensors are still in the engine and it is still full of oil. $1,700 dollars. I live in east TN.
I also have the stock auto transmission, convertor and flexplate with no problems that I know of $300.00.
If you are going to put a turbo 350 or 400 I have a brand new Fuddle convertor for a LS1 conversion 3,800 stall and 2.5 STR for $360.00
All of the sensors are still in the engine and it is still full of oil. $1,700 dollars. I live in east TN.
I also have the stock auto transmission, convertor and flexplate with no problems that I know of $300.00.
If you are going to put a turbo 350 or 400 I have a brand new Fuddle convertor for a LS1 conversion 3,800 stall and 2.5 STR for $360.00