Strange 12 Bolt *HOLIDAY SPECIAL*
#1
TECH Apprentice
Thread Starter
iTrader: (4)
Join Date: Apr 2003
Location: Decatur, IL
Posts: 351
Likes: 0
Received 0 Likes
on
0 Posts
Strange 12 Bolt *HOLIDAY SPECIAL*
Billingsley Racing is offering this HOLIDAY SPECIAL for the Strange 12 Bolt, no minimum number of orders needed! This is a "complete" bolt-in rearend~you don't need to take your rearend apart, or send in backing plates, etc. This is a bolt in for 3 or 4 channel, equipped with rings for ABS/TCS as well. We are the only Strange Dealer that can offer this!!
PRG210-Fully assembled and dyno tested 12 bolt rear (less brakes);
Features:
*3.150" ID Housing Ends
*33 spline S/S axles
*1/2" or M12 x 1.5 studs
*33 spline Torque-Line Posi Unit
*Choice of 3 channel (center) or 4 channel (axle) ABS
*Choice of Caliper Mounts ((93-97 or 98-02)
*U1602 S-Series Yoke (1350)
*Crossover U-Joint, U-Bolts
*Chrome Cover
*Your Choice of U.S./Strange standard gear set
*Includes Backing Plates and Reluctor Rings if needed-you don't need to do anything! 100% Bolt-In!
$2249 for the complete package~Upgrades available listed below:
*PRGOP8 Super Strength Posi Unit without Ring $110
*PRGOP14 Super Strength Posi Unit with Ring $145
*PRGOP10 Aluminum Support Cover $115
This *SPECIAL* is good through the holidays, ending Dec 31st.
Thanks,
Amber
PRG210-Fully assembled and dyno tested 12 bolt rear (less brakes);
Features:
*3.150" ID Housing Ends
*33 spline S/S axles
*1/2" or M12 x 1.5 studs
*33 spline Torque-Line Posi Unit
*Choice of 3 channel (center) or 4 channel (axle) ABS
*Choice of Caliper Mounts ((93-97 or 98-02)
*U1602 S-Series Yoke (1350)
*Crossover U-Joint, U-Bolts
*Chrome Cover
*Your Choice of U.S./Strange standard gear set
*Includes Backing Plates and Reluctor Rings if needed-you don't need to do anything! 100% Bolt-In!
$2249 for the complete package~Upgrades available listed below:
*PRGOP8 Super Strength Posi Unit without Ring $110
*PRGOP14 Super Strength Posi Unit with Ring $145
*PRGOP10 Aluminum Support Cover $115
This *SPECIAL* is good through the holidays, ending Dec 31st.
Thanks,
Amber
#3
TECH Apprentice
Thread Starter
iTrader: (4)
Join Date: Apr 2003
Location: Decatur, IL
Posts: 351
Likes: 0
Received 0 Likes
on
0 Posts
Sorry, we can't include shipping with that price. It depends on where you are located. Email me your zip and I will try to give you an estimate.
BRIsales@aol.com
Thanks!
Amber
BRIsales@aol.com
Thanks!
Amber
#7
TECH Apprentice
Thread Starter
iTrader: (4)
Join Date: Apr 2003
Location: Decatur, IL
Posts: 351
Likes: 0
Received 0 Likes
on
0 Posts
I sent PM's to you guys with zip codes on here. These are estimates, and shipping costs are somewhat less when they can be shipped to a business and without a lift gate. Other than that, that's all I can think of that would help make this as cheap as possible.
Let me know if you have any other questions.
Thanks
Amber
Let me know if you have any other questions.
Thanks
Amber
Trending Topics
#8
11 Second Club
Join Date: Feb 2003
Location: Nicholls, GA
Posts: 78
Likes: 0
Received 0 Likes
on
0 Posts
I also need to know the shipping cost to zip code 31554 Georgia. Also I have a couple of questions are these rearends TCS ready and which one of the upgrade packages do I need for a 2002 Z-28 with the ring or without. Thanks Malcom
#9
TECH Apprentice
Thread Starter
iTrader: (4)
Join Date: Apr 2003
Location: Decatur, IL
Posts: 351
Likes: 0
Received 0 Likes
on
0 Posts
Red346-Tried to call you, but them remembered that you are at that # after 4pm. Anyway, yes these are TCS ready. We suggest the Super Strength Posi without the ring, since you have TCS.
Feel free to email or post any more questions. Or if you need a call.
Also, shipping to you would run approx $130-140.
To everyone-as far as shipping cost, if you are in the midwest it's going to be approx $100-$130, and further out would be around $150-160. Unless in CA or somewhere on the coasts, it will run closer to $200. Hope this helps.
Thanks,
Amber
Feel free to email or post any more questions. Or if you need a call.
Also, shipping to you would run approx $130-140.
To everyone-as far as shipping cost, if you are in the midwest it's going to be approx $100-$130, and further out would be around $150-160. Unless in CA or somewhere on the coasts, it will run closer to $200. Hope this helps.
Thanks,
Amber
#11
LS1Tech Sponsor
iTrader: (12)
Just to let you guy's know about shipping.
#1-you do not need there lift gate trucks.The rear is very easy to get off the truck.
#2-they quoted me $190 for shipping.When the shipping company called me to deliver I asked the price,they said $280!!! I said forget it because I was quoted $90 for shipping(screwing around)They said OK,we'll do it for $90..
So the point is,watch out what the shipping company charges.
#1-you do not need there lift gate trucks.The rear is very easy to get off the truck.
#2-they quoted me $190 for shipping.When the shipping company called me to deliver I asked the price,they said $280!!! I said forget it because I was quoted $90 for shipping(screwing around)They said OK,we'll do it for $90..
So the point is,watch out what the shipping company charges.
#12
TECH Apprentice
Thread Starter
iTrader: (4)
Join Date: Apr 2003
Location: Decatur, IL
Posts: 351
Likes: 0
Received 0 Likes
on
0 Posts
Normal turnaround time is 2-3 weeks to have one of these 12 bolts built and shipped. Since this is a special and not a GP, the order will be placed with Strange the day you order with us.
Thanks
Thanks
#14
TECH Apprentice
Thread Starter
iTrader: (4)
Join Date: Apr 2003
Location: Decatur, IL
Posts: 351
Likes: 0
Received 0 Likes
on
0 Posts
Toonz--Shipping to you will run approx $150-$160.
Strange can't give exact shipping quotes so we can't either-the cost depends on the city and location in the city, fuel prices, and if it's to a residence or business....the highest I have seen was $270 to New Jersey. Most are between $130-$200.
Thanks
Strange can't give exact shipping quotes so we can't either-the cost depends on the city and location in the city, fuel prices, and if it's to a residence or business....the highest I have seen was $270 to New Jersey. Most are between $130-$200.
Thanks
#16
TECH Apprentice
Thread Starter
iTrader: (4)
Join Date: Apr 2003
Location: Decatur, IL
Posts: 351
Likes: 0
Received 0 Likes
on
0 Posts
This is as low as the price gets. This is actually already a GP price, but as a service to our customers, we are offering as a "holiday special" with no minimum amount of orders needed, for those who want to get a 12 bolt but have to depend on others to order as well to get the good pricing. Feel free to shop around, I don't think you'll find a better value.
Thanks
Amber
Thanks
Amber
#19
TECH Apprentice
Thread Starter
iTrader: (4)
Join Date: Apr 2003
Location: Decatur, IL
Posts: 351
Likes: 0
Received 0 Likes
on
0 Posts
Just a reminder this sale lasts through the end of the year! Don't miss out!! For those who have already taken advantage of this super deal, we have several units shipping in the next few weeks.
Thanks
Thanks