Superman09

iTrader: (65)

Here is an intro into the new Huron Speed Single Turbo, truck manifold kit for 98-02 LS1 cars.

Many of you may recognize the user name as I have been a member on here for many years as an enthusiast. Same guy, just branching off doing what I enjoy! If you have any questions, that is what this thread is for, thanks!

I am a new vendor to LS1tech, but have been a supporting Vendor on CorvetteForum for nearing 2 full years now so have full confidence!

Thanks,
Jon


Huron Speed 1998-2002 LS1 F-body Truck Manifold Single Turbo Kit
Here it is! Should be ready to ship here shortly, in the next couple of weeks!

We are taking Pre-Orders for kits for a $300 savings. Kits should be shipping within 3-5 weeks, I am shooting for SOONER. If that time period does pass, you are entitled to a full refund!

Pre-Order special pricing on this kit is $1999.99. You can view and order on our website at:
http://shop.huronspeedproducts.com/F...FBodyTurbo.htm

I thought I would bring it to your attention that I have put one of the first pre-order kits up on the auction site. This is your chance to get one of the first kits for an even better deal, possibly even below cost if the bids don't get up there!!!

http://www.ebay.com/itm/260955952472...#ht_806wt_1291


This kit is MUCH more complete than your run of the mill Truck Manifold kit. Comes with the complete hot-side, cold-side, all couplers, clamps, brackets, flanges, gaskets, etc as you can see from the picture! Kit includes all components to run either the 38mm or 44mm Wastegate, as well as to run a MAF or not!
All piping is made from 321 Stainless, yes 321!


Components:

-2.5" crossover with T4 flange and 38mm Wastegate Flange, dump to atmosphere

-38mm-44mm Wastegate Adapter Flange

-3" Downpipe with 3" V-Band flange (3" V-band on exhaust end also for easy to add on more exhaust)

-3" Cold side piping from turbo to FMIC to Throttle Body

-MAF Delete pipe

-50mm Blow-Off Valve Flange on Cold side piping

-4" core front mount Intercooler

-All exact, specific couplers

-Extra exact couplers to run or not run the MAF Delete

-All exact, specific T-Bolt clamps

-All gaskets

-F-body front mount intercoolers brackets w/ bolts

-F-body alternator relocation brackets



All piping made from 321 stainless steel, fully polished.

Requires Turbo, Wastegate, BOV, Oil Lines, and Truck Manifolds to complete

Being a truck manifold kit, you will lose your A/C

Kit retains factory radiator in factory position, just need to add pusher fans


Kits include what you see in this picture below!



Note: Kit's come with BLACK silicone couplers, not the blue you see on the installed vehicle.

djfury05

iTrader: (30)

Very nice river rat!!

Superman09

iTrader: (65)

haha thank you, a bit dusty though!

revtech101

Do you have any dyno's for this kit?

Cosmos

iTrader: (15)

Can you keep the front sway bar or do you have to remove it? Also, could I just buy the hotside?

Superman09

iTrader: (65)

Not at the moment as our current vehicle suffered a trans problem. We are currently waiting on parts to swap in a th400 for the car

Superman09

iTrader: (65)

Great question,
if you want to keep the front sway bar, you will have to lower it. Currently we are only selling the kits complete with hot and cold. Being priced where it is, it would really be difficult to build your own cold side for the same price as buying the hot side and fabbing your own

Superman09

iTrader: (65)

$1999.99 for a complete hot and cold side with all brackets, couplers, clamps, etc!

Sofls1

iTrader: (16)

Nice setup, any plans to do a setup keeping the a/c? maybe one that uses a BMR K member and C6 pass manifold?

Cosmos

iTrader: (15)

What do you mean lower it? Put spacers between the bar mount and get shorter endlinks? I'm thinking I want to go Turbo some time but I don't wanna loose mg sway bar

Superman09

iTrader: (65)

At the moment we do not, but maybe in the future. The truck manifold set up is just so clean and simple, and works fine with the stock K

Superman09

iTrader: (65)

Yes, just simply put a spacer where the sway bar mounts to the frame to lower it enough to clear the pipe, no biggie, I did it on the last twin turbo build with truck manifolds!

Superman09

iTrader: (65)

Another kit sold!

Keep them coming, thanks!

Superman09

iTrader: (65)

And another one gone! Won't last too long once people catch on to how good of a deal this is!

Blown02Camaro

iTrader: (4)

Could yall make a kit for a tc78 turbo to keep the a/c that places the turbo where the battery is? If so how much would that be? Im planning on using an aftermarket radiator with this as well

Superman09

iTrader: (65)

We could, but it would be a one off kit. Currently we are offering these truck manifolds kits as production kits.

BOBS99SS

iTrader: (2)

looks like a really nice kit

Superman09

iTrader: (65)

Thanks! Get em' while they're hot!

Blown02Camaro

iTrader: (4)

I kind of figured it would be a custom kit. All I need is the hot side and a down pipe.

Superman09

iTrader: (65)

Yes, at this point we are not doing any one-offs. Maybe down the road when we get a bunch of our other projects finished up!