Jet-Hot Header GP - LS1TECH

Log In 


Jet-Hot Header GP

Reply
 
Thread Tools Search this Thread
Old 11-17-2002, 07:36 PM   #1
Teching In
Thread Starter
 
Join Date: Aug 2002
Location: Bridgeport, PA
Posts: 49
Default Jet-Hot Header GP

Jet-Hot now has it's own header for LS1 F-bodies! Here are the specs:
1 3/4" primaries, long tube, 3" slip on collector
16 gauge tubes, 3/8" thick flange.
Flange is a one-piece, completely flat design, not the "protruding tube" style.
They have EGR & AIR accomodations designed around the 98-99 models.
O2 bungs are welded in the collectors.
Paper type gaskets & standard bolts are included.
Headers double coated in & out with Jet-Hot Sterling finish, so Lifetime rust-through warranty applies.
Headers are made in the U.S. of A., so the welds and tubes are of the highest quality. No cheap stuff.

Price is $511 including shipping & handling within the 48 states. Jet-Hot is offering a 2 payment plan at no additional cost as well. Basically you pay 1/2 when you order, and the credit card is billed the other 1/2 30 days later.

I don't have any pictures yet, but should within a week or so. Our prototype was sent off to get photographed to appear in GM High Tech Performance magazine, otherwise I'd snap a shot myself.

We have 25 that will be showing up in our Arizona facility tomorrow, so they can be shipped by the end of the week. If you have any questions please email me or call 800-432-3379 x112.

Thanks

Todd
JetHotTodd is offline   Reply With Quote
Old 11-17-2002, 09:09 PM   #2
On The Tree
iTrader: (-1)
 
Join Date: Nov 2001
Location: Carrollton,Tx
Posts: 143
Default Re: Jet-Hot Header GP

how long is this gp going to be going on?
98darkbird is offline   Reply With Quote
Old 11-18-2002, 08:51 AM   #3
Teching In
Thread Starter
 
Join Date: Aug 2002
Location: Bridgeport, PA
Posts: 49
Default Re: Jet-Hot Header GP

I knew I'd forget to post something! This is going to run until the 25 are sold, which shouldn't be long.
JetHotTodd is offline   Reply With Quote
Old 11-18-2002, 11:02 AM   #4
TECH Enthusiast
 
z28man's Avatar
 
Join Date: May 2002
Location: PA
Posts: 512
Default Re: Jet-Hot Header GP

what kind of y pipe can you use and will it all work with a borla cat back system. what about 02 simms? installation kit?
z28man is offline   Reply With Quote
Old 11-18-2002, 11:04 AM   #5
TECH Enthusiast
 
z28man's Avatar
 
Join Date: May 2002
Location: PA
Posts: 512
Default Re: Jet-Hot Header GP

also will these work with a 2000 z-28
z28man is offline   Reply With Quote
Old 11-18-2002, 01:16 PM   #6
TECH Resident
 
Join Date: Nov 2001
Location: the third rock from the sun!
Posts: 770
Default Re: Jet-Hot Header GP

Just ordered mine. <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" /> Two pay plan...woohoo! <img border="0" alt="[Fluffy]" title="" src="graemlins/fluffy.gif" />

Should go nicely with a true dual setup don't 'cha think?! <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" /> Nice talking to ya Todd! <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />

<small>[ November 22, 2002, 03:23 AM: Message edited by: WEASEL ]</small>
WEASEL is offline   Reply With Quote
Old 11-18-2002, 01:57 PM   #7
TECH Enthusiast
 
Join Date: Jul 2002
Location: dyersburg,tn
Posts: 731
Default Re: Jet-Hot Header GP

This is a really good price.I am very interested.I would like to some pics though.
justin sutton is offline   Reply With Quote
Old 11-18-2002, 02:37 PM   #8
TECH Apprentice
 
Join Date: Apr 2002
Location: Hickory, NC
Posts: 368
Default Re: Jet-Hot Header GP

Todd:
I applaud you guys for taking the time to survey and get feedback on what potential customers want in a long tube header; however, I see no mention of a "complete" kit including Y-pipe.
To be more specific, I can't even begin to count the number of individuals who replied to the survey who need a y-pipe with cats. Please tell me you will be offering a Y-pipe with cat. converters.
TrentSS is offline   Reply With Quote
Old 11-18-2002, 02:54 PM   #9
TECH Enthusiast
 
Join Date: Jul 2002
Location: dyersburg,tn
Posts: 731
Default Re: Jet-Hot Header GP

Long tubes with true duals rule. <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />
justin sutton is offline   Reply With Quote
Old 11-18-2002, 04:51 PM   #10
Teching In
Thread Starter
 
Join Date: Aug 2002
Location: Bridgeport, PA
Posts: 49
Default Re: Jet-Hot Header GP

I've got a couple post to respond to here...

1. I'll get pics up as soon as I can.

2. These headers are compatible with the Hooker off road ypipe. That's the short-term solution. I've just started working on the cat issue as many have brought it up. Jet-Hot doesn't really want to get into the issue of emissions certification, so we're looking at what options are out there. At any rate, your voice is heard and we're working on it.
JetHotTodd is offline   Reply With Quote
Old 11-18-2002, 05:14 PM   #11
TECH Enthusiast
 
Join Date: Jul 2002
Location: dyersburg,tn
Posts: 731
Default Re: Jet-Hot Header GP

Todd thanks I will be looking for the pics.I am really interested in a set just curious on how the look.
justin sutton is offline   Reply With Quote
Old 11-19-2002, 05:05 PM   #12
TECH Enthusiast
 
Join Date: Jul 2002
Location: dyersburg,tn
Posts: 731
Default Re: Jet-Hot Header GP

Talked to Todd today.Alot of help.I will be ordering a set asap.
justin sutton is offline   Reply With Quote
Old 11-19-2002, 11:24 PM   #13
TECH Resident
 
Join Date: Nov 2001
Location: the third rock from the sun!
Posts: 770
Default Re: Jet-Hot Header GP

</font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">Originally posted by justin sutton:
<strong>Talked to Todd today.Alot of help.I will be ordering a set asap.</strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">Justin...sent you email!
WEASEL is offline   Reply With Quote
Old 11-22-2002, 03:22 AM   #14
TECH Resident
 
Join Date: Nov 2001
Location: the third rock from the sun!
Posts: 770
Default Re: Jet-Hot Header GP

ttt
WEASEL is offline   Reply With Quote
Old 11-22-2002, 07:59 AM   #15
TECH Enthusiast
 
Dave Carney's Avatar
 
Join Date: Nov 2001
Location: Derby, KS
Posts: 688
Default Re: Jet-Hot Header GP

</font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">Originally posted by JetHotTodd:
<strong>Jet-Hot doesn't really want to get into the issue of emissions certification</strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif"><img border="0" title="" alt="[Confused]" src="images/icons/confused.gif" /> , say what? They couldn't be emissions certified even if you wanted to, because they change the location of the cats. So forget about certification. That's not why people want them anyway. They want them to pass a sniffer test, or a lax visual inspection, or maybe they have a little tree hugger in them, or in my case I like the sound better, they kill the rasp.

Lots of people waiting on this option, I'd venture to say none of them are waiting for or expecting any sort of certification.

<small>[ November 22, 2002, 08:00 AM: Message edited by: Dave Carney ]</small>
Dave Carney is offline   Reply With Quote
Old 11-22-2002, 01:04 PM   #16
Staging Lane
iTrader: (1)
 
Join Date: Oct 2002
Location: Chicagoland
Posts: 72
Default Re: Jet-Hot Header GP

Question for JetHot:

Will you have a set of these headers on display at the PRI tradeshow?
Gary U is offline   Reply With Quote
Old 11-23-2002, 09:15 AM   #17
Teching In
Thread Starter
 
Join Date: Aug 2002
Location: Bridgeport, PA
Posts: 49
Default Re: Jet-Hot Header GP

We do plan to have one set at PRI.
JetHotTodd is offline   Reply With Quote
Old 11-26-2002, 10:27 AM   #18
Teching In
Thread Starter
 
Join Date: Aug 2002
Location: Bridgeport, PA
Posts: 49
Default Re: Jet-Hot Header GP

I wanted to let you know that we did sell the first run of these. Response has been good, and I thank you all for your business. As such we are going to extend this price through close of business(7pm ET) on Wednesday, 11/27/02.

If you have any questions please feel free to email or call me.

Thanks

Todd
800-432-3379x112
JetHotTodd is offline   Reply With Quote
Old 11-26-2002, 02:48 PM   #19
TECH Apprentice
iTrader: (6)
 
Join Date: Nov 2002
Location: Oklahoma City
Posts: 302
Default Re: Jet-Hot Header GP

Hey JetHotTodd , How about some for the LT-1 cars? I would love to have some that "look" emmissions compatible. That price would be great also!
chevroletfreak is offline   Reply With Quote
Old 11-27-2002, 10:01 AM   #20
Teching In
Thread Starter
 
Join Date: Aug 2002
Location: Bridgeport, PA
Posts: 49
Default Re: Jet-Hot Header GP

First off, I finally got some headers to take photos of today. They're not on jet-hot.com yet, so if you want them, email me and I'll send them over.

Second, I have had requests for these headers without AIR & EGR connections. We are taking names and email addresses of those interested. If there is sufficient interest we will build them on the next production run. Let me know.

Third, we are working on LT1 headers, but they probably won't be ready for 4-8 weeks. I had no plans of putting AIR & EGR connections in them. If people are interested, now would be a good time to speak up.
JetHotTodd is offline   Reply With Quote
Reply


Tags
dyersburg, hot, jet, jhlt1, ls1, picx, tr6

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are Off



All times are GMT -5. The time now is 11:48 PM.