Everyday Is "Black Friday" At TBYRNE Motorsports!
11-20-2007, 10:27 AM
#1
TECH Senior Member
Thread Starter
iTrader: (15)
Join Date: Dec 2001
Location: Mass
Posts: 8,642
Likes: 0
Received 0 Likes
on
0 Posts
Everyday Is "Black Friday" At TBYRNE Motorsports! No need to get up at 4am, go out in the cold and then stand in line waiting to get trampled when the doors open on Friday. We have deep discounts available for you every day of the year. Everyday is Black Friday at TBYRNE Motorsports! Inductions, exhausts, headers, superchargers, turbos, torque converters, clutches plus much more. We have everything covered and are offering prices that are lower than what is listed on our website. Just give us a call at 1-877-482-9763 or e-mail tbyrne@tbyrne.com to receive a quote.
Our Kooks and ATI prices are lower than they allow us to put in writing so we can only provide a quote for them over the phone.
Happy Holidays!
TBYRNE MOTORSPORTS LLC
ORDER LINE - 1-877-4-TBYRNE
E-MAIL - tbyrne@tbyrne.com
CHECK OUR WEBSITE FOR OUR EVERYDAY LOW PRICE POLICY!
Our Kooks and ATI prices are lower than they allow us to put in writing so we can only provide a quote for them over the phone.
Happy Holidays!
TBYRNE MOTORSPORTS LLC
ORDER LINE - 1-877-4-TBYRNE
E-MAIL - tbyrne@tbyrne.com
CHECK OUR WEBSITE FOR OUR EVERYDAY LOW PRICE POLICY!
11-20-2007, 12:49 PM
#2
TECH Senior Member
Thread Starter
iTrader: (15)
Join Date: Dec 2001
Location: Mass
Posts: 8,642
Likes: 0
Received 0 Likes
on
0 Posts
Besides what is posted above, we will be using this thread to highlight some specific products. Think of them as "product reminders". The first is the Weiand intake manifold.
TBYRNE Motorsports carries the complete line of products that are in the Holley family. This includes Holley | Hooker Headers | Lunati | Earl's | Weiand | NOS | Flowtech. If you need something from any of those brands, we can take care of that for you!
Polished version pictured
The cast aluminum design is more durable than the factory composite. "Boost" or "spray," the 300-111P can handle the added stress of forced induction and nitrous injection. It contains extra material for flow modifications (hand, CNC, or Extrude Hone") to feed hungry modified LS1 engines. The aluminum manifold's thicker walls can also be machined for NOS fogger nozzles or other modifications
Features
Idle - 6200 RPM power band.
Cast aluminum design.
Satin finish 1manifold can be polished).
Extra material allows for flow modifications.
Thick aluminum walls can be machined for NOS®.
Underside panel is removed to facilitate access to runners.
Installation
Uses factory replacement-type throttle body.
Utilizes regular paper gaskets to seal ports.
Replacement gasket set available under P/N 108-117
300-111 Weiand Aluminum intake
300-111P Weiand Aluminum intake (polished)
Give us a call at 1-877-482-9763 or e-mail tbyrne@tbyrne.com for our current discounted pricing.
Have a good day!
TBYRNE MOTORSPORTS LLC
ORDER LINE - 1-877-4-TBYRNE
E-MAIL - tbyrne@tbyrne.com
CHECK OUR WEBSITE FOR OUR EVERYDAY LOW PRICE POLICY!
TBYRNE Motorsports carries the complete line of products that are in the Holley family. This includes Holley | Hooker Headers | Lunati | Earl's | Weiand | NOS | Flowtech. If you need something from any of those brands, we can take care of that for you!
Polished version pictured
The cast aluminum design is more durable than the factory composite. "Boost" or "spray," the 300-111P can handle the added stress of forced induction and nitrous injection. It contains extra material for flow modifications (hand, CNC, or Extrude Hone") to feed hungry modified LS1 engines. The aluminum manifold's thicker walls can also be machined for NOS fogger nozzles or other modifications
Features
Idle - 6200 RPM power band.
Cast aluminum design.
Satin finish 1manifold can be polished).
Extra material allows for flow modifications.
Thick aluminum walls can be machined for NOS®.
Underside panel is removed to facilitate access to runners.
Installation
Uses factory replacement-type throttle body.
Utilizes regular paper gaskets to seal ports.
Replacement gasket set available under P/N 108-117
300-111 Weiand Aluminum intake
300-111P Weiand Aluminum intake (polished)
Give us a call at 1-877-482-9763 or e-mail tbyrne@tbyrne.com for our current discounted pricing.
Have a good day!
TBYRNE MOTORSPORTS LLC
ORDER LINE - 1-877-4-TBYRNE
E-MAIL - tbyrne@tbyrne.com
CHECK OUR WEBSITE FOR OUR EVERYDAY LOW PRICE POLICY!
11-20-2007, 01:41 PM
#3
TECH Senior Member
Thread Starter
iTrader: (15)
Join Date: Dec 2001
Location: Mass
Posts: 8,642
Likes: 0
Received 0 Likes
on
0 Posts
Nitrous Oxide Systems (NOS) showed the world how to effectively harness the power of nitrous oxide for automotive use in the 1970's. Since then, NOS has powered more racers than any other brand of nitrous. When you're looking to go fast, rely on NOS to deliver the most power per dollar available. From stock engines to race vehicles, jet skis to trucks, NOS has a kit for you.
A new product from NOS is -
Launcher Progressive Nitrous Controller with LCD touch screen
Part #: 15975NOS
Features:
Fully Programmable via laptop or with the included 3.5" Color, touch screen LCD for the ultimate in programming and looks. (No laptop Required)
Compatible with Windows 2000, ME, XP, and Vista
NEW innovative NOSbus 2-wire network interface for seamless integration with other Holley/NOS supported products
Easy to use graphical software
Free software and firmware updates updatable by the user, downloadable off the internet
3.5" Color, touch screen LCD also features a SD card slot for saving configuration files and data-logging as well as a USB interface
Full data-logging capability for easy reviewing of past runs through laptop or included LCD touch screen saves information to a SD card
Ability to save configuration files for easy set-up at different tracks or for weather conditions
LCD touch screen allows changes in the staging lanes without laptop
Fully programmable 2 stages of nitrous control and with the optional slave controller you can add two more stages for a total of 4.
Give us a call at 1-877-482-9763 or e-mail tbyrne@tbyrne.com for our current discounted pricing.
Have a good day!
TBYRNE MOTORSPORTS LLC
ORDER LINE - 1-877-4-TBYRNE
E-MAIL - tbyrne@tbyrne.com
CHECK OUR WEBSITE FOR OUR EVERYDAY LOW PRICE POLICY!
11-20-2007, 01:53 PM
#4
TECH Senior Member
Thread Starter
iTrader: (15)
Join Date: Dec 2001
Location: Mass
Posts: 8,642
Likes: 0
Received 0 Likes
on
0 Posts
We are offering DEEP discounts for all superchargers and head units that ATI ProCharger produces! Current pricing is lower than we are allowed to put in writing so you'll need to give us a call at 1-877-4-TBYRNE (1-877-482-9763) to receive a price quote.
You can apply for 90 days Same As Cash financing if you don't want to use one of your regular credit cards.
Very competitive installation rates are available if you would like us to do the wrenching for you.
Have a good day!
TBYRNE MOTORSPORTS LLC
ORDER LINE - 1-877-4-TBYRNE
E-MAIL - tbyrne@tbyrne.com
CHECK OUR WEBSITE FOR OUR EVERYDAY LOW PRICE POLICY!
11-20-2007, 02:06 PM
#5
TECH Senior Member
Thread Starter
iTrader: (15)
Join Date: Dec 2001
Location: Mass
Posts: 8,642
Likes: 0
Received 0 Likes
on
0 Posts
The racing season will soon be coming to a close for alot of people. That means that there are probably alot of stock 10 bolt rearends begging to be replaced. We can help get a new Strange 12 bolt or Dana S60 under your car and save you some money in the process. We've really "sharpened our pencils to provide you with prices that start as low as $1950.00! Prices are way to low to advertise so we have to ask that you e-mail tbyrne@tbyrne.com or give us a call at 1-877-482-9763 to receive a quote. To give you an idea how good our these deals are -
SC093 SPEC LS1 Stage 3 clutch
PRSF05 Strange Dana S60 rearend
Package price - $2279.99
12 Bolt -
Gear ratios available are 3.42, 3.73, 3.90 and 4.10. The 3.90s will be noisy so Strange doesn't promote this one. This rearend now comes standard with the Super Strength posi. Each one is shipped ready to be installed. You will just need to swap the brakes from your current rear. Shipping is freight collect for this product so you will need to take care of that with the driver when he delivers.
PRG210-PRGOP8 Fully assembled and dyno tested rearend (less brakes). Features include 3.150" ID housing ends, 33 spline S/S axles, 1/2" studs,33 spline Super Strength posi unit, choice of 3 channel (center) or 4 channel (axle) ABS ring installed, ABS sensor installed, choice of caliper mounts (1993-'97 or 1998-'02), U-1602 S-series yoke(1350), cross over U-joint, u-bolts, chrome cover and your choice of US Strange standard gear set - 3.42, 3.73, 3.90 or 4.10. (part # for cars with ABS sensor at the axles - usually for traction control cars)
PRG210-PRGOP-14 Fully assembled and dyno tested rearend (less brakes). Features include 3.150" ID housing ends, 33 spline S/S axles, 1/2" studs,33 spline Super Strength posi unit, choice of 3 channel (center) or 4 channel (axle) ABS ring installed, ABS sensor installed, choice of caliper mounts (1993-'97 or 1998-'02), U-1602 S-series yoke(1350), cross over U-joint, u-bolts, chrome cover and your choice of US Strange standard gear set - 3.42, 3.73, 3.90 or 4.10. (part # for cars with ABS sensor on the top of the pumpkin)
R5206 Upgrade to aluminum support cover $114.99
gmbbp Options: You will either need to send in your brake backing plates or you can purchase a set to be built into the rear (1998+). If your car has traction control you will need to send in your backing plates along with your axles so Strange can use the reluctor rings. $229.99
gmbbpcore Options: If you can't have any vehicle downtime we can charge you $229.99 for a set of backing plates and send them to Strange to be build into your rear. After your 12 bolt is installed you'd send your stock backing plates to us and we'd credit you $175.00. This option is only available if your car does not have traction control or the ABS at the axles. The backing plates are only required for 1998+ cars.. $229.99
Dana S60 -
Dana S60 features -
35 spline axles
HD Posi
Chrome Cover
3 or 4 channel ABS
You will need to send your brake backing plates in just before the rear is built so they can be built into the rear. We can sell a new set to you separate. The stock driveshaft will need to be shortened by 1.625".
The following gear ratios are available - 3.54, 3.73, 4.10, 4.30, 4.56, 4.88, 5.87.
The weight difference between Dana 60 and 12 bolt is 20-25 lbs, the Dana is heavier. Dana rear is fully assembled with posi weights around 215 lbs and 12 bolt is around 189 lbs (weight with brakes). The weight difference between 12 bolt and 9" is about 12-15 lbs the 12 bolt being lighter.
Ring gear sizes:
12 bolts ring gear only 8.875 OD
9 ring gear is is 9" OD
Dana has ring gear of 9.75 OD which is alot stronger than 12 bolt & 9".
The standard Dana gear (not Pro) can withstand close to 1200 RWHP.
The True-Track is posi is standard along with Power-Lock. These are good for about 600rwhp. The Dana's posi is alot stronger than a 12 bolt and the 9". This is because the Dana Posi's are 35 spline, 12 bolt is 33 spline and the 9" is a 33 spline.
Driveshafts for Dana S60
U1699 Strange U1699 driveshaft 3"x.083" DOM chrome moly driveshaft with H.D. U-joints
U1700 Strange U1700 driveshaft 3"x.083" Seamless chrome moly driveshaft with High Imp. U-Joints
U1702 Strange U1702driveshaft 3"x.083" Seamless DOM chrome moly driveshaft with H.D. U-joints
Orders can be placed online or by calling 1-877-4-TBYRNE.(1-877-482-9763).
Have a good day!
TBYRNE MOTORSPORTS LLC
ORDER LINE - 1-877-4-TBYRNE
E-MAIL - tbyrne@tbyrne.com
CHECK OUR WEBSITE FOR OUR EVERYDAY LOW PRICE POLICY!
SC093 SPEC LS1 Stage 3 clutch
PRSF05 Strange Dana S60 rearend
Package price - $2279.99
12 Bolt -
Gear ratios available are 3.42, 3.73, 3.90 and 4.10. The 3.90s will be noisy so Strange doesn't promote this one. This rearend now comes standard with the Super Strength posi. Each one is shipped ready to be installed. You will just need to swap the brakes from your current rear. Shipping is freight collect for this product so you will need to take care of that with the driver when he delivers.
PRG210-PRGOP8 Fully assembled and dyno tested rearend (less brakes). Features include 3.150" ID housing ends, 33 spline S/S axles, 1/2" studs,33 spline Super Strength posi unit, choice of 3 channel (center) or 4 channel (axle) ABS ring installed, ABS sensor installed, choice of caliper mounts (1993-'97 or 1998-'02), U-1602 S-series yoke(1350), cross over U-joint, u-bolts, chrome cover and your choice of US Strange standard gear set - 3.42, 3.73, 3.90 or 4.10. (part # for cars with ABS sensor at the axles - usually for traction control cars)
PRG210-PRGOP-14 Fully assembled and dyno tested rearend (less brakes). Features include 3.150" ID housing ends, 33 spline S/S axles, 1/2" studs,33 spline Super Strength posi unit, choice of 3 channel (center) or 4 channel (axle) ABS ring installed, ABS sensor installed, choice of caliper mounts (1993-'97 or 1998-'02), U-1602 S-series yoke(1350), cross over U-joint, u-bolts, chrome cover and your choice of US Strange standard gear set - 3.42, 3.73, 3.90 or 4.10. (part # for cars with ABS sensor on the top of the pumpkin)
R5206 Upgrade to aluminum support cover $114.99
gmbbp Options: You will either need to send in your brake backing plates or you can purchase a set to be built into the rear (1998+). If your car has traction control you will need to send in your backing plates along with your axles so Strange can use the reluctor rings. $229.99
gmbbpcore Options: If you can't have any vehicle downtime we can charge you $229.99 for a set of backing plates and send them to Strange to be build into your rear. After your 12 bolt is installed you'd send your stock backing plates to us and we'd credit you $175.00. This option is only available if your car does not have traction control or the ABS at the axles. The backing plates are only required for 1998+ cars.. $229.99
Dana S60 -
Dana S60 features -
35 spline axles
HD Posi
Chrome Cover
3 or 4 channel ABS
You will need to send your brake backing plates in just before the rear is built so they can be built into the rear. We can sell a new set to you separate. The stock driveshaft will need to be shortened by 1.625".
The following gear ratios are available - 3.54, 3.73, 4.10, 4.30, 4.56, 4.88, 5.87.
The weight difference between Dana 60 and 12 bolt is 20-25 lbs, the Dana is heavier. Dana rear is fully assembled with posi weights around 215 lbs and 12 bolt is around 189 lbs (weight with brakes). The weight difference between 12 bolt and 9" is about 12-15 lbs the 12 bolt being lighter.
Ring gear sizes:
12 bolts ring gear only 8.875 OD
9 ring gear is is 9" OD
Dana has ring gear of 9.75 OD which is alot stronger than 12 bolt & 9".
The standard Dana gear (not Pro) can withstand close to 1200 RWHP.
The True-Track is posi is standard along with Power-Lock. These are good for about 600rwhp. The Dana's posi is alot stronger than a 12 bolt and the 9". This is because the Dana Posi's are 35 spline, 12 bolt is 33 spline and the 9" is a 33 spline.
Driveshafts for Dana S60
U1699 Strange U1699 driveshaft 3"x.083" DOM chrome moly driveshaft with H.D. U-joints
U1700 Strange U1700 driveshaft 3"x.083" Seamless chrome moly driveshaft with High Imp. U-Joints
U1702 Strange U1702driveshaft 3"x.083" Seamless DOM chrome moly driveshaft with H.D. U-joints
Orders can be placed online or by calling 1-877-4-TBYRNE.(1-877-482-9763).
Have a good day!
TBYRNE MOTORSPORTS LLC
ORDER LINE - 1-877-4-TBYRNE
E-MAIL - tbyrne@tbyrne.com
CHECK OUR WEBSITE FOR OUR EVERYDAY LOW PRICE POLICY!
11-20-2007, 06:15 PM
#6
TECH Senior Member
Thread Starter
iTrader: (15)
Join Date: Dec 2001
Location: Mass
Posts: 8,642
Likes: 0
Received 0 Likes
on
0 Posts
The Meziere pumps have been tested at the track, on the dyno and most importantly, during street driving. They have allowed engines to run cooler at low speeds and gain high end horsepower. In addition to the released power, you get to keep all of your factory accessories. Taking quality to the extreme, the WP319 features a dual bearing belt idler, billet parts throughout, and a “weather-tite” electrical connection. The pump is backed by a two-year warranty.
Features:
Purpose built for street use – 3000+ hour life expectancy.
Fully polished or anodized in your choice of 4 colors (Black,Blue,Red,Natural).
Chrome upgrade available.
55 GPM free flowing rating.
All stainless steel hardware included.
Heater and bypass provisions.
Light weight. Complete standard pump weighs only 14.9 pounds!
Stainless steel large diameter main shaft with high performance ceramic seal.
Inlet fitting supplied to match stock configuration.
Easy install - truly a "bolt-on" pump.
Full two year warranty - the best in the business!
Finishing The System:
This pump is supplied complete with gaskets and hardware, complete and ready to bolt on. The only additional item you will need is a standard Chevrolet thermostat if you desire to use one. It will install behind the exit fitting located above the idler pulley.
Amperage draw:
Under normal use the pump will draw 11-12 amps.
Overall Height Dimension:
The standard pump is 7.88" long from the mounting surface to the tip of the pump.
Pump Weight:
This application weighs 14.9 lbs.
Other colors -
WP319N Meziere electric water pump (natural) with thermostat
WP319R Meziere electric water pump (red) with thermostat
WP319B Meziere electric water pump (blue) with thermostat
WP319PU Meziere electric water pump (purple) with thermostat
WP319U Meziere electric water pump (polished) with thermostat
WP319C Meziere electric water pump (chrome) with thermostat
NOTE: New pumps now say LS instead of LS1.
This is another product that is covered by our Everyday Low Pricing Policy! Pricing is lower than we are allowed to advertise so we have to ask that you give us a call at 1-877-482-9763 or e-mail tbyrne@tbyrne.com to receive a quote.
Have a good day!
TBYRNE MOTORSPORTS LLC
ORDER LINE - 1-877-4-TBYRNE
E-MAIL - tbyrne@tbyrne.com
CHECK OUR WEBSITE FOR OUR EVERYDAY LOW PRICE POLICY!
Features:
Purpose built for street use – 3000+ hour life expectancy.
Fully polished or anodized in your choice of 4 colors (Black,Blue,Red,Natural).
Chrome upgrade available.
55 GPM free flowing rating.
All stainless steel hardware included.
Heater and bypass provisions.
Light weight. Complete standard pump weighs only 14.9 pounds!
Stainless steel large diameter main shaft with high performance ceramic seal.
Inlet fitting supplied to match stock configuration.
Easy install - truly a "bolt-on" pump.
Full two year warranty - the best in the business!
Finishing The System:
This pump is supplied complete with gaskets and hardware, complete and ready to bolt on. The only additional item you will need is a standard Chevrolet thermostat if you desire to use one. It will install behind the exit fitting located above the idler pulley.
Amperage draw:
Under normal use the pump will draw 11-12 amps.
Overall Height Dimension:
The standard pump is 7.88" long from the mounting surface to the tip of the pump.
Pump Weight:
This application weighs 14.9 lbs.
Other colors -
WP319N Meziere electric water pump (natural) with thermostat
WP319R Meziere electric water pump (red) with thermostat
WP319B Meziere electric water pump (blue) with thermostat
WP319PU Meziere electric water pump (purple) with thermostat
WP319U Meziere electric water pump (polished) with thermostat
WP319C Meziere electric water pump (chrome) with thermostat
NOTE: New pumps now say LS instead of LS1.
This is another product that is covered by our Everyday Low Pricing Policy! Pricing is lower than we are allowed to advertise so we have to ask that you give us a call at 1-877-482-9763 or e-mail tbyrne@tbyrne.com to receive a quote.
Have a good day!
TBYRNE MOTORSPORTS LLC
ORDER LINE - 1-877-4-TBYRNE
E-MAIL - tbyrne@tbyrne.com
CHECK OUR WEBSITE FOR OUR EVERYDAY LOW PRICE POLICY!
11-20-2007, 06:17 PM
#7
TECH Senior Member
Thread Starter
iTrader: (15)
Join Date: Dec 2001
Location: Mass
Posts: 8,642
Likes: 0
Received 0 Likes
on
0 Posts
We always have great pricing available for the complete line of Kooks long tube headers! Current pricing is lower than Kooks would like us to put in writing so we have to ask that you give us a call at 1-877-4-TBYRNE (1-877-482-9763) to receive a quote.
Very good deals here!
Have a good day!
TBYRNE MOTORSPORTS LLC
ORDER LINE - 1-877-4-TBYRNE
E-MAIL - tbyrne@tbyrne.com
CHECK OUR WEBSITE FOR OUR EVERYDAY LOW PRICE POLICY!
Very good deals here!
Have a good day!
TBYRNE MOTORSPORTS LLC
ORDER LINE - 1-877-4-TBYRNE
E-MAIL - tbyrne@tbyrne.com
CHECK OUR WEBSITE FOR OUR EVERYDAY LOW PRICE POLICY!
Trending Topics
11-20-2007, 06:18 PM
#8
TECH Senior Member
Thread Starter
iTrader: (15)
Join Date: Dec 2001
Location: Mass
Posts: 8,642
Likes: 0
Received 0 Likes
on
0 Posts
We currently have substancial discounts available for all of the Wilwood brake packages! This covers any vehicle that they produce brakes for!
Kit Features:
Superlite 6 Big Brake Front Hat Kits are engineered for use in conjunction with OE front hubs on a variety of competition, show, custom, and sport driving applications. Billet Superlite 6 piston calipers, PolyMatrix brake pads, machined aluminum hats, and 13 or 14"" GT directional vane rotors exemplify award winning style and provide the ultimate in Big Brake stopping power. Born from Wilwood's 25 year tradition of building championship brake systems, SL6 Big Brake kits are the perfect compliment to wheel, tire, and suspension equipment upgrades.
Calipers Available in Black or Red:
SL6 calipers are pure performance featuring a fully CNC machined billet body with closed end bridges and a reinforced bridge to body transition. Center bridge body bolts provide additional strength and positive retention of the pads. These elements combine as an ultra-rigid body that resists separation and deflection under high load. Driver comfort and confidence soar with immediate response from a very firm pedal. The SL6 generates high clamping force and balanced pad loading from a race-proven differential bore six-piston configuration. Staggered piston sizes distribute pressure to compensate for the natural variances in temperature, load, and wear rate that occur over the length of the pad. Pad life is extended and performance is measurably improved. Stainless steel pistons are used in all custom show and sport performance applications for their low heat transfer properties and resistance to corrosion. Road race kits feature SL6/ST calipers with Thermlock® pistons for maximum heat protection in extreme heat environments. High temperature, square faced piston seals provide long service life in extreme environments with positive piston retraction on release. Stainless steel SRS bridge wear plates eliminate pad gouging and extend the service life of the caliper. The spring-loaded action of the SRS plates also eliminates pad rattle and dampens the vibration harmonics that contribute to pad squeal. Fluid tubes are dampened to eliminate vibration stress and recess mounted for protection from track debris. SL6 calipers bear Wilwood's signature and a high luster black anodized finish in a style that will catch the eye and win the favor of the most discriminating enthusiast.
GT aluminum hats are lightweight and strong to manage the exceptional brake torque generated by the SL6 Big Brake system. The hats are specially designed for use on OE hubs without modifications or interference to the suspension or ABS components. The hats carry Wilwood's signature and a high luster black anodized finish to prevent corrosion and enhance the overall appearance of the complete package inside the wheel
Large diameter vented iron rotors provide substantial increases in cooling and stopping power over small diameter OE rotors. All Wilwood rotors are manufactured from premium grade, long grain carbon iron to provide long wear with high thermal stability and resistance to distortion. The superior heat absorption and dissipation qualities of a directional vane iron rotor are essential to preventing heat fade and realizing the longest service life from the pads and rotors. For custom, show, and high performance sport driving, SRP rotor kits offer the high-tech look and improved performance of a directional cross-drill and face slot pattern. In addition to their aesthetic appeal, the venting and cleaning action of the holes and slots will reduce pad glaze, dissipate surface heat, and minimize irregular pad build-up on the rotor faces. The results are smoother engagement with improved consistency and response at the pedal. Every SRP rotor is treated with a silver zinc wash to reduce corrosion on the areas of the rotor not kept clean by pad contact. GT rotor kits feature Wilwood's ultimate competition rotor with full detail machining, asymmetrical face slotting and individual dynamic balancing. GT rotors run true and vibration free with extended rotor life and pad wear on applications subject to higher sustained operating temperatures.
PolyMatrix brake pads get fast response with high resistance to fade, long wear, and the low rotor abrasion that PolyMatrix is so well known for. Specific pad types and compounds have been selected for each application and are listed in the service parts guide for each kit.
Aluminum mount brackets are lightweight and strong. Each bracket is CNC machined for precise fit on each specific spindle. Grade 8 strength or higher nuts, bolts, studs, washers, and alignment shims are included with each kit.
Please give us a call at 1-877-4-TBYRNE (1-877-482-9763) or e-mail nicole@tbyrnemotorsports.com to receive a quote!
Have a good day!
TBYRNE MOTORSPORTS LLC
ORDER LINE - 1-877-4-TBYRNE
E-MAIL - tbyrne@tbyrne.com
CHECK OUR WEBSITE FOR OUR EVERYDAY LOW PRICE POLICY!
Kit Features:
Superlite 6 Big Brake Front Hat Kits are engineered for use in conjunction with OE front hubs on a variety of competition, show, custom, and sport driving applications. Billet Superlite 6 piston calipers, PolyMatrix brake pads, machined aluminum hats, and 13 or 14"" GT directional vane rotors exemplify award winning style and provide the ultimate in Big Brake stopping power. Born from Wilwood's 25 year tradition of building championship brake systems, SL6 Big Brake kits are the perfect compliment to wheel, tire, and suspension equipment upgrades.
Calipers Available in Black or Red:
SL6 calipers are pure performance featuring a fully CNC machined billet body with closed end bridges and a reinforced bridge to body transition. Center bridge body bolts provide additional strength and positive retention of the pads. These elements combine as an ultra-rigid body that resists separation and deflection under high load. Driver comfort and confidence soar with immediate response from a very firm pedal. The SL6 generates high clamping force and balanced pad loading from a race-proven differential bore six-piston configuration. Staggered piston sizes distribute pressure to compensate for the natural variances in temperature, load, and wear rate that occur over the length of the pad. Pad life is extended and performance is measurably improved. Stainless steel pistons are used in all custom show and sport performance applications for their low heat transfer properties and resistance to corrosion. Road race kits feature SL6/ST calipers with Thermlock® pistons for maximum heat protection in extreme heat environments. High temperature, square faced piston seals provide long service life in extreme environments with positive piston retraction on release. Stainless steel SRS bridge wear plates eliminate pad gouging and extend the service life of the caliper. The spring-loaded action of the SRS plates also eliminates pad rattle and dampens the vibration harmonics that contribute to pad squeal. Fluid tubes are dampened to eliminate vibration stress and recess mounted for protection from track debris. SL6 calipers bear Wilwood's signature and a high luster black anodized finish in a style that will catch the eye and win the favor of the most discriminating enthusiast.
GT aluminum hats are lightweight and strong to manage the exceptional brake torque generated by the SL6 Big Brake system. The hats are specially designed for use on OE hubs without modifications or interference to the suspension or ABS components. The hats carry Wilwood's signature and a high luster black anodized finish to prevent corrosion and enhance the overall appearance of the complete package inside the wheel
Large diameter vented iron rotors provide substantial increases in cooling and stopping power over small diameter OE rotors. All Wilwood rotors are manufactured from premium grade, long grain carbon iron to provide long wear with high thermal stability and resistance to distortion. The superior heat absorption and dissipation qualities of a directional vane iron rotor are essential to preventing heat fade and realizing the longest service life from the pads and rotors. For custom, show, and high performance sport driving, SRP rotor kits offer the high-tech look and improved performance of a directional cross-drill and face slot pattern. In addition to their aesthetic appeal, the venting and cleaning action of the holes and slots will reduce pad glaze, dissipate surface heat, and minimize irregular pad build-up on the rotor faces. The results are smoother engagement with improved consistency and response at the pedal. Every SRP rotor is treated with a silver zinc wash to reduce corrosion on the areas of the rotor not kept clean by pad contact. GT rotor kits feature Wilwood's ultimate competition rotor with full detail machining, asymmetrical face slotting and individual dynamic balancing. GT rotors run true and vibration free with extended rotor life and pad wear on applications subject to higher sustained operating temperatures.
PolyMatrix brake pads get fast response with high resistance to fade, long wear, and the low rotor abrasion that PolyMatrix is so well known for. Specific pad types and compounds have been selected for each application and are listed in the service parts guide for each kit.
Aluminum mount brackets are lightweight and strong. Each bracket is CNC machined for precise fit on each specific spindle. Grade 8 strength or higher nuts, bolts, studs, washers, and alignment shims are included with each kit.
Please give us a call at 1-877-4-TBYRNE (1-877-482-9763) or e-mail nicole@tbyrnemotorsports.com to receive a quote!
Have a good day!
TBYRNE MOTORSPORTS LLC
ORDER LINE - 1-877-4-TBYRNE
E-MAIL - tbyrne@tbyrne.com
CHECK OUR WEBSITE FOR OUR EVERYDAY LOW PRICE POLICY!
11-20-2007, 06:21 PM
#9
TECH Senior Member
Thread Starter
iTrader: (15)
Join Date: Dec 2001
Location: Mass
Posts: 8,642
Likes: 0
Received 0 Likes
on
0 Posts
TBYRNE Motorsports sells and installs the complete line of STS Turbos! If they make it, we can get it and provide you with some amazing prices! Regular retail is listed on our website but the sale prices are much better! You can receive a quote by giving us a call at 1-877-482-9763 or by sending an e-mail to tbyrne@tbyrne.com. Get your other quotes and then contact us when you want the best deal!
Have a great day!
TBYRNE MOTORSPORTS LLC
ORDER LINE - 1-877-4-TBYRNE
E-MAIL - tbyrne@tbyrne.com
CHECK OUR WEBSITE FOR WEEKLY SPECIALS! INSTALLATION SPECIALS AVAILABLE!
Have a great day!
TBYRNE MOTORSPORTS LLC
ORDER LINE - 1-877-4-TBYRNE
E-MAIL - tbyrne@tbyrne.com
CHECK OUR WEBSITE FOR WEEKLY SPECIALS! INSTALLATION SPECIALS AVAILABLE!
11-20-2007, 06:23 PM
#10
TECH Senior Member
Thread Starter
iTrader: (15)
Join Date: Dec 2001
Location: Mass
Posts: 8,642
Likes: 0
Received 0 Likes
on
0 Posts
We have discounts available for the complete line of Baer Brakes on sale! This applies to their Eradispeed rotors along with big brake packages. If they make it, we sell it and have it included in this sale!
Prices are lower than we should advertise so it's best to give us a call at 1-877-482-9763 or e-mail nicole@tbyrnemotorsports.com to receive a quote. Info for packages that we usually carry can be seen on our website.
Have a good day!
TBYRNE MOTORSPORTS LLC
ORDER LINE - 1-877-4-TBYRNE
E-MAIL - tbyrne@tbyrne.com
CHECK OUR WEBSITE FOR OUR EVERYDAY LOW PRICE POLICY!
Prices are lower than we should advertise so it's best to give us a call at 1-877-482-9763 or e-mail nicole@tbyrnemotorsports.com to receive a quote. Info for packages that we usually carry can be seen on our website.
Have a good day!
TBYRNE MOTORSPORTS LLC
ORDER LINE - 1-877-4-TBYRNE
E-MAIL - tbyrne@tbyrne.com
CHECK OUR WEBSITE FOR OUR EVERYDAY LOW PRICE POLICY!
11-24-2007, 01:02 PM
#14
Staging Lane
iTrader: (1)
Join Date: Oct 2007
Location: Pensacola, FL
Posts: 50
Likes: 0
Received 0 Likes
on
0 Posts
Looking to purchase:
SLP air lid
Hooker LT headers (or Kooks)
Y pipe
Hotchkis Strut tower brace
FAST 90 intake and TB to match
Any help?
Will be shipped to US Marine in Pensacola (32507)
Thanks for your time.
SLP air lid
Hooker LT headers (or Kooks)
Y pipe
Hotchkis Strut tower brace
FAST 90 intake and TB to match
Any help?
Will be shipped to US Marine in Pensacola (32507)
Thanks for your time.
11-27-2007, 03:11 PM
#16
TECH Senior Member
Thread Starter
iTrader: (15)
Join Date: Dec 2001
Location: Mass
Posts: 8,642
Likes: 0
Received 0 Likes
on
0 Posts
Hooker LT headers - Hooker headers in black
Y pipe - off road Y-pipe in mild steel
Hotchkis Strut tower brace (2006)
FAST 90 intake and TB to match (TB-30-54008) (Intake 30-54003)
$1882.94 + $134. for shipping.
11-28-2007, 09:38 AM
#17
TECH Senior Member
Thread Starter
iTrader: (15)
Join Date: Dec 2001
Location: Mass
Posts: 8,642
Likes: 0
Received 0 Likes
on
0 Posts
We have discounts available for the complete line of Hal products. They produce 12 and 24 way adjustable shocks for the f-body. Pricing is lower than they allow us to advertise but you can receive a quote by e-mailing tbyrne@tbyrne.com or giving us a call at 1-877-482-9763. Part numbers are listed below.
Generation-F Front
QA1 Motorsports has the single best front shock available for GM F-body cars (1993 – present Camaros and Firebirds). Street, strip, or handling, this is the shock that can do it all! The GEN-F provides machined aluminum, externally adjustable shocks designed specifically for this series chassis. The valving adjustment is made with a single **** at the base of the shock (12 settings total), enabling you to adjust to changing track conditions or for ride comfort. This shock is the dominant force at the track and on the street.
The GEN-F shock is machined aluminum, bright anodized, and incorporates No. 8 Acme threads for easy ride height adjustments or adding preload to the front suspension. Based on the Proma Star AL, (see page 5) the GEN-F series uses the same 5/8” centerless ground, hard chrome piston rod for unmatched precision. Another plus, as with all QA1 Motorsports, is that the GEN-F is completely rebuildable and revalvable for a lifetime of service and customizing.
The sealing system in the GEN-F series rivals the best in the industry. It is designed to nearly eliminate seal drag, yet handle the rigors of everyday use. The GEN-F is simply the most versatile front shock available on the market today for 1993 – present Camaros and Firebirds.
OED-7855-P
-------------------
Generation-F Rear
GM F-body cars’ (1982 – present Camaros and Firebirds) chassis design uses a torque arm suspension, differing them from the rest of the crowd. That’s why QA1 Motorsports has also designed a superior rear shock specifically for this series chassis. The GEN-F rear shock is engineered to handle it all – from drag and road racing to everyday street use.
The GEN-F offers a wide range of valving adjustments (12 settings) through just one ****. This bright anodized, machined aluminum, externally adjustable shock utilizes the same quality pieces found in all our shocks – 5/8” triple chrome piston rod, the highest quality fluid, and individual dyno testing. The sealing system is the best in the industry – it nearly eliminates seal drag, yet easily handles the rigors of everyday use. Plus, GEN-F rear shocks are rebuildable and revalvable for a lifetime of high performance use and customizing as you update.
TC-2501-P
12 Way Adjustable Shocks -
Double Adjustable Front F-Body Shocks
• Ride Height Adjustable Directly threaded body allows for stock or Aluminum shock with 576 valving options. Allows truly independent adjustment of compression and rebound. 24 positions of compression adjustment on one ****, and 24 positions of rebound adjustment on the other ****. Each **** is clearly labeled with an "R" for rebound or a "C" for compression, as well as plus and minus symbols for ease of adjustment.
Front F-Body Springs
QA1 offers the perfect springs for 1993 - 2002 Camaro/Firebird front suspensions using the GEN-F front shock. QA1 now offers three spring choices for your Gen-F vehicle. Purposely built with factory and modified small block cars in mind, the springs below are designed to set on the GEN-F spring seat and fit into the factory location at the top. When used in conjunction with the GEN-F front shocks, they are unmatched in ease of installation and performance.
- 275 lb. spring Drag Racing
- 300 lb. spring Nice Ride & Handling
- 325 lb. spring Firm Ride, Great Handling & Cornering
Double Adjustable Rear F-Body Shock
Aluminum shock with 576 valving options. Allows truly independent adjustment of compression and rebound. Includes Lower shock bolt.
OED7855P Hal Single Adjustable Front Shock (12 Way Adjustable)
DOE7855P Hal Double Adjustable Front Shock (24 Way Adjustable)
RC7855P Hal Front Shock - Drag Racing Only
TC2501P Hal single Adjustable Rear Shock (12 Way Adjustable)
DTC2502P Hal Double Adjustable Rear Shock (24 Way Adjustable)
15FB275 Hal Front Drag Springs - 275# (Recommended for LS1)
15FB300 Hal Front Drag Springs - 300# (Recommended for LT1)
15FB325 Hal Front Drag Springs - 325# (Recommended for Handling)
T114W Hal Spanner Wrench (Recommended)
TBYRNE MOTORSPORTS LLC
ORDER LINE - 1-877-4-TBYRNE
E-MAIL - tbyrne@tbyrne.com
CHECK OUR WEBSITE FOR OUR EVERYDAY LOW PRICE POLICY!
Generation-F Front
QA1 Motorsports has the single best front shock available for GM F-body cars (1993 – present Camaros and Firebirds). Street, strip, or handling, this is the shock that can do it all! The GEN-F provides machined aluminum, externally adjustable shocks designed specifically for this series chassis. The valving adjustment is made with a single **** at the base of the shock (12 settings total), enabling you to adjust to changing track conditions or for ride comfort. This shock is the dominant force at the track and on the street.
The GEN-F shock is machined aluminum, bright anodized, and incorporates No. 8 Acme threads for easy ride height adjustments or adding preload to the front suspension. Based on the Proma Star AL, (see page 5) the GEN-F series uses the same 5/8” centerless ground, hard chrome piston rod for unmatched precision. Another plus, as with all QA1 Motorsports, is that the GEN-F is completely rebuildable and revalvable for a lifetime of service and customizing.
The sealing system in the GEN-F series rivals the best in the industry. It is designed to nearly eliminate seal drag, yet handle the rigors of everyday use. The GEN-F is simply the most versatile front shock available on the market today for 1993 – present Camaros and Firebirds.
OED-7855-P
-------------------
Generation-F Rear
GM F-body cars’ (1982 – present Camaros and Firebirds) chassis design uses a torque arm suspension, differing them from the rest of the crowd. That’s why QA1 Motorsports has also designed a superior rear shock specifically for this series chassis. The GEN-F rear shock is engineered to handle it all – from drag and road racing to everyday street use.
The GEN-F offers a wide range of valving adjustments (12 settings) through just one ****. This bright anodized, machined aluminum, externally adjustable shock utilizes the same quality pieces found in all our shocks – 5/8” triple chrome piston rod, the highest quality fluid, and individual dyno testing. The sealing system is the best in the industry – it nearly eliminates seal drag, yet easily handles the rigors of everyday use. Plus, GEN-F rear shocks are rebuildable and revalvable for a lifetime of high performance use and customizing as you update.
TC-2501-P
12 Way Adjustable Shocks -
Double Adjustable Front F-Body Shocks
• Ride Height Adjustable Directly threaded body allows for stock or Aluminum shock with 576 valving options. Allows truly independent adjustment of compression and rebound. 24 positions of compression adjustment on one ****, and 24 positions of rebound adjustment on the other ****. Each **** is clearly labeled with an "R" for rebound or a "C" for compression, as well as plus and minus symbols for ease of adjustment.
Front F-Body Springs
QA1 offers the perfect springs for 1993 - 2002 Camaro/Firebird front suspensions using the GEN-F front shock. QA1 now offers three spring choices for your Gen-F vehicle. Purposely built with factory and modified small block cars in mind, the springs below are designed to set on the GEN-F spring seat and fit into the factory location at the top. When used in conjunction with the GEN-F front shocks, they are unmatched in ease of installation and performance.
- 275 lb. spring Drag Racing
- 300 lb. spring Nice Ride & Handling
- 325 lb. spring Firm Ride, Great Handling & Cornering
Double Adjustable Rear F-Body Shock
Aluminum shock with 576 valving options. Allows truly independent adjustment of compression and rebound. Includes Lower shock bolt.
OED7855P Hal Single Adjustable Front Shock (12 Way Adjustable)
DOE7855P Hal Double Adjustable Front Shock (24 Way Adjustable)
RC7855P Hal Front Shock - Drag Racing Only
TC2501P Hal single Adjustable Rear Shock (12 Way Adjustable)
DTC2502P Hal Double Adjustable Rear Shock (24 Way Adjustable)
15FB275 Hal Front Drag Springs - 275# (Recommended for LS1)
15FB300 Hal Front Drag Springs - 300# (Recommended for LT1)
15FB325 Hal Front Drag Springs - 325# (Recommended for Handling)
T114W Hal Spanner Wrench (Recommended)
TBYRNE MOTORSPORTS LLC
ORDER LINE - 1-877-4-TBYRNE
E-MAIL - tbyrne@tbyrne.com
CHECK OUR WEBSITE FOR OUR EVERYDAY LOW PRICE POLICY!
11-28-2007, 09:45 AM
#18
TECH Senior Member
Thread Starter
iTrader: (15)
Join Date: Dec 2001
Location: Mass
Posts: 8,642
Likes: 0
Received 0 Likes
on
0 Posts
TBYRNE Motorsports carries most products that SLP produces and can provide them to you at the lowest price that they allow. Plus, we can offer you a very good price for shipping too! Just our way of saving you some money!
This covers headers, exhausts, inductions, short block assemblies plus much more. It doesn't matter what vehicle they are going on. The list is to long to post but you can give us a call or e-mail tbyrne@tbyrne.com for pricing. Please note the part numbers that your interesting in.
Orders can be placed online or by giving us a call at 1-877-482-9763.
Have a great day!
TBYRNE MOTORSPORTS LLC
ORDER LINE - 1-877-4-TBYRNE
E-MAIL - tbyrne@tbyrne.com
CHECK OUR WEBSITE FOR OUR EVERYDAY LOW PRICE POLICY!
This covers headers, exhausts, inductions, short block assemblies plus much more. It doesn't matter what vehicle they are going on. The list is to long to post but you can give us a call or e-mail tbyrne@tbyrne.com for pricing. Please note the part numbers that your interesting in.
Orders can be placed online or by giving us a call at 1-877-482-9763.
Have a great day!
TBYRNE MOTORSPORTS LLC
ORDER LINE - 1-877-4-TBYRNE
E-MAIL - tbyrne@tbyrne.com
CHECK OUR WEBSITE FOR OUR EVERYDAY LOW PRICE POLICY!
11-29-2007, 10:23 AM
#19
TECH Senior Member
Thread Starter
iTrader: (15)
Join Date: Dec 2001
Location: Mass
Posts: 8,642
Likes: 0
Received 0 Likes
on
0 Posts
We have discounts available for the complete line of Stainless Works headers and exhausts. Pricing is lower than we are allowed to put in writing so we have to ask that you give us a call at 1-877-482-9763 to receive a quote. Very good pricing here!
Info can be seen on our website and also on the Stainless Works website.
Have a good day!
TBYRNE MOTORSPORTS LLC
ORDER LINE - 1-877-4-TBYRNE
E-MAIL - tbyrne@tbyrne.com
CHECK OUR WEBSITE FOR OUR EVERYDAY LOW PRICE POLICY!
Info can be seen on our website and also on the Stainless Works website.
Have a good day!
TBYRNE MOTORSPORTS LLC
ORDER LINE - 1-877-4-TBYRNE
E-MAIL - tbyrne@tbyrne.com
CHECK OUR WEBSITE FOR OUR EVERYDAY LOW PRICE POLICY!
11-29-2007, 12:49 PM
#20
TECH Senior Member
Thread Starter
iTrader: (15)
Join Date: Dec 2001
Location: Mass
Posts: 8,642
Likes: 0
Received 0 Likes
on
0 Posts
We are offering discounts for all of RK Sport's exterior products. This covers their hood, wings, groundeffects and anything else that they make for the outside of the vehicle. Pricing is lower than we are allowed to advertise so we have to ask that you give us a call at 1-877-482-9763 or e-mail tbyrne@tbyrne.com to receive a quote.
Have a good day!
TBYRNE MOTORSPORTS LLC
ORDER LINE - 1-877-4-TBYRNE (1-877-482-9763)
E-MAIL - tbyrne@tbyrne.com
CHECK OUR WEBSITE FOR OUR EVERYDAY LOW PRICE POLICY!
Have a good day!
TBYRNE MOTORSPORTS LLC
ORDER LINE - 1-877-4-TBYRNE (1-877-482-9763)
E-MAIL - tbyrne@tbyrne.com
CHECK OUR WEBSITE FOR OUR EVERYDAY LOW PRICE POLICY!