I'm in the middle of installing a new HU with a "TransAm" HU Mount. I'm finding that its too deep and won't fit because of the tab that held the Monsoon. Is this a common problem? I guess I could cut the plastic tab but there is also a metal tab along with it. What have others done with this?
__________________ "The Corn Chicken" - The First Corn Blown F-Body....12psi->570RWHP/490RWTQ, 11.82@119, 1.67 60'
2001 SOM WS6,M6,#10/195, D1SC, 8.6"/8rib,CustomFuelSystem,Spohn PHB/LCA,UMI 3ptSFC, MWC 9", TPIS Headers,ORY,MagnaflowCB,DynomaxBullet,RUFF 278's, E85 Flex-Fuel Tune By Andy @ Dynotune
i also remember there being a small screw securing the metal tab. It took me awhile but I was finally able to get the screw out and remove the tab all together. I also, cut the plastic piece. I think even most single to 1.5 din adapters have this step in their instructions.