Homedone 200mph dash
09-18-2011, 12:47 AM
#1
11 Second Club
Thread Starter
iTrader: (3)
Join Date: Oct 2007
Location: Hawaii
Posts: 857
Likes: 0
Received 0 Likes
on
0 Posts
Homedone 200mph dash Whats to stop me from putting a 200mph overlay on the dash, and then using HPTuners and keep changing the rear end ratio until I get it right? it wouldnt take that long, just go 60 mph and keep changing the rear end ratio until it read 60 on the dash, right?
what do you guys think, I ask because 300$ is a lot for the 200mph gauge, and i have heard the unit he attaches to the back goes bad sometimes.
what do you guys think, I ask because 300$ is a lot for the 200mph gauge, and i have heard the unit he attaches to the back goes bad sometimes.
Trending Topics
well not really, but ive blown the budget i allocated myself for this ride.
10-14-2011, 11:22 PM
#9
Won't work, been doing it for years, won't work. Especially if you have an auto, you'll burn your tranny out with messed up shift points quickly...
Also, even if all the problems didn't exist, just getting it right at 60 wouldn't even come close to getting it right all the other places.
It is expensive because all the drivers have to be replaced. No offense intended at all but this is a mod for the big racers or big car show guys looking for an edge. Costs too much to have any point otherwise, IMHO at least...
Also, even if all the problems didn't exist, just getting it right at 60 wouldn't even come close to getting it right all the other places.
It is expensive because all the drivers have to be replaced. No offense intended at all but this is a mod for the big racers or big car show guys looking for an edge. Costs too much to have any point otherwise, IMHO at least...
10-18-2011, 08:26 AM
#10
12 Second Club
iTrader: (45)
Join Date: Dec 2006
Location: O'Hare
Posts: 526
Likes: 0
Received 0 Likes
on
0 Posts
Won't work, been doing it for years, won't work. Especially if you have an auto, you'll burn your tranny out with messed up shift points quickly...
Also, even if all the problems didn't exist, just getting it right at 60 wouldn't even come close to getting it right all the other places.
It is expensive because all the drivers have to be replaced. No offense intended at all but this is a mod for the big racers or big car show guys looking for an edge. Costs too much to have any point otherwise, IMHO at least...
Also, even if all the problems didn't exist, just getting it right at 60 wouldn't even come close to getting it right all the other places.
It is expensive because all the drivers have to be replaced. No offense intended at all but this is a mod for the big racers or big car show guys looking for an edge. Costs too much to have any point otherwise, IMHO at least...
/end thread.
10-21-2011, 09:45 PM
#11
11 Second Club
Thread Starter
iTrader: (3)
Join Date: Oct 2007
Location: Hawaii
Posts: 857
Likes: 0
Received 0 Likes
on
0 Posts
Won't work, been doing it for years, won't work. Especially if you have an auto, you'll burn your tranny out with messed up shift points quickly...
Also, even if all the problems didn't exist, just getting it right at 60 wouldn't even come close to getting it right all the other places.
It is expensive because all the drivers have to be replaced. No offense intended at all but this is a mod for the big racers or big car show guys looking for an edge. Costs too much to have any point otherwise, IMHO at least...
Also, even if all the problems didn't exist, just getting it right at 60 wouldn't even come close to getting it right all the other places.
It is expensive because all the drivers have to be replaced. No offense intended at all but this is a mod for the big racers or big car show guys looking for an edge. Costs too much to have any point otherwise, IMHO at least...
10-21-2011, 10:36 PM
#12
