Monsoon Question
#1
Launching!
Thread Starter
Join Date: Dec 2009
Location: California
Posts: 273
Likes: 0
Received 0 Likes
on
0 Posts
Monsoon Question
For sometime now I have had the display on my HU not light up.
I just looked at it with some reflective light and noticed that it is still functional, counting down tunes and showing the time.
It just isn't lighting up.
Is it possible that it has a backlight problem?
Maybe I don't need to replace the display itself..
I just looked at it with some reflective light and noticed that it is still functional, counting down tunes and showing the time.
It just isn't lighting up.
Is it possible that it has a backlight problem?
Maybe I don't need to replace the display itself..
#2
Copy & Paste Moderator
Here are some threads about Monsoon Display and Lighting issues:
https://ls1tech.com/forums/showthrea...ht=monsoon+led
https://ls1tech.com/forums/showthrea...onsoon+display
https://ls1tech.com/forums/showthrea...onsoon+display
https://ls1tech.com/forums/showthrea...onsoon+display
https://ls1tech.com/forums/showthrea...onsoon+display
https://ls1tech.com/forums/showthrea...onsoon+display
https://ls1tech.com/forums/showthrea...onsoon+display
Basically it could be 2 issues: a) the bulb blew or b) the solder on the screen's contacts needs to be re-flowed because it has cracked.
Since the display appears to work but just isn't lit, its probably a blown bulb.
If it was a solder problem, the display would appear garbled.
https://ls1tech.com/forums/showthrea...ht=monsoon+led
https://ls1tech.com/forums/showthrea...onsoon+display
https://ls1tech.com/forums/showthrea...onsoon+display
https://ls1tech.com/forums/showthrea...onsoon+display
https://ls1tech.com/forums/showthrea...onsoon+display
https://ls1tech.com/forums/showthrea...onsoon+display
https://ls1tech.com/forums/showthrea...onsoon+display
Basically it could be 2 issues: a) the bulb blew or b) the solder on the screen's contacts needs to be re-flowed because it has cracked.
Since the display appears to work but just isn't lit, its probably a blown bulb.
If it was a solder problem, the display would appear garbled.