CD Changer bracket okay for amplifier ground?
01-20-2012, 08:17 AM
#1
TECH Apprentice
Thread Starter
iTrader: (17)
Join Date: Feb 2007
Posts: 380
Likes: 0
Received 0 Likes
on
0 Posts
CD Changer bracket okay for amplifier ground? *2002 Camaro
I removed my 12 disc changer to make room for a compact JL amp and sub box. On the little shelf, left side of the hatch well where the changer was secured there is a mettle bracket sticking up through the carpet with a hole in it. This looks like a clean/convenient place for a ground wire.. Would this be acceptable?
I removed my 12 disc changer to make room for a compact JL amp and sub box. On the little shelf, left side of the hatch well where the changer was secured there is a mettle bracket sticking up through the carpet with a hole in it. This looks like a clean/convenient place for a ground wire.. Would this be acceptable?
01-20-2012, 02:37 PM
#2
TECH Addict
Absolutely not.
I recommend pulling the trim back there off and using one of the upper seatbelt attachment bolts after scraping off some paint. You will need a large terminal ring, like 3/8" I believe it was. Use dielectric grease and/or battery terminal sealant afterwards.
Perhaps someone might know of an even better option, but that one I mentioned is MUCH better than what you mentioned.
I recommend pulling the trim back there off and using one of the upper seatbelt attachment bolts after scraping off some paint. You will need a large terminal ring, like 3/8" I believe it was. Use dielectric grease and/or battery terminal sealant afterwards.
Perhaps someone might know of an even better option, but that one I mentioned is MUCH better than what you mentioned.
