Whats this extra cable for?
05-05-2004, 04:09 AM
#1
Staging Lane
Thread Starter
Join Date: Jan 2004
Posts: 97
Likes: 0
Received 0 Likes
on
0 Posts
Whats this extra cable for? On the back of the stock monsoon radio in a 2002 firehawk their are two quick connect plugs. One which has all the speaker wires, power, ground, and so on. Then theres a smaller set of wires that plugs into the center rear of the radio with about 4 wires going into it. Anyone know what this set of wires are for?
05-06-2004, 07:52 AM
#3
Staging Lane
Thread Starter
Join Date: Jan 2004
Posts: 97
Likes: 0
Received 0 Likes
on
0 Posts
Even without a CD Changer? I didnt have a changer in my car. Perhaps its prewired for one, then all they had to do is install one and plug the other end in.
I was thinking it was the steering wheel controls. But then I wasnt sure, since I thought they operated on infra red, like a remote.
I was thinking it was the steering wheel controls. But then I wasnt sure, since I thought they operated on infra red, like a remote.
05-06-2004, 08:43 AM
#4
The second connector should be a 9-pin connector with only five pins actually used. That is the CD changer harness - it is installed on all Monsoon systems whether or not you have a changer. The other end is taped to the left rear speaker harness under the hatch if you don't have a changer installed.
The steering wheel controls are hardwired not infrared. There is a single wire in the main radio harness that measures the resistance caused by pressing different switches on the steering wheel.
The steering wheel controls are hardwired not infrared. There is a single wire in the main radio harness that measures the resistance caused by pressing different switches on the steering wheel.