Wheel controls
10-11-2005, 12:35 AM
#1
Launching!
Thread Starter
iTrader: (9)
Join Date: Aug 2005
Location: Austin / Eagle Pass, Tx
Posts: 208
Likes: 0
Received 0 Likes
on
0 Posts
Wheel controls I did the bulb replacement, and it worked wonderfully, now my lights light up red 
, but now the controls don't work and I don't know whats wrong with it 
Has anyone experienced this? 
, but now the controls don't work and I don't know whats wrong with it Has anyone experienced this? 
10-11-2005, 08:30 AM
#2
On The Tree
Join Date: Aug 2005
Location: Wichita Falls, Texas
Posts: 165
Likes: 0
Received 0 Likes
on
0 Posts
could be dirty switches or cold solder joints. After I got my TA they were hard to turn the volums down then wouldn't mute so I took them apart and fixed the cold solder joints and cleaned the switches with a good contact cleaner
10-11-2005, 01:48 PM
#3
Launching!
Thread Starter
iTrader: (9)
Join Date: Aug 2005
Location: Austin / Eagle Pass, Tx
Posts: 208
Likes: 0
Received 0 Likes
on
0 Posts
I just fixed it one side wasn't fully connected so neither side were working but the lights were on. makes it so much better I got my lights and my working controls back Thanks for the advice by the way.
one side wasn't fully connected so neither side were working but the lights were on. makes it so much better I got my lights and my working controls back Thanks for the advice by the way.