Air/fuel ratio install help!!
#7
TECH Apprentice
iTrader: (1)
Join Date: Aug 2005
Location: southern cali
Posts: 334
Likes: 0
Received 0 Likes
on
0 Posts
my bad its pin #65 & #66 http://www.ls2.com/boggs/torques/00pinpcm.htm
and make sure u get a good connection it took me forever to firgure out why it wasnt working. .
and make sure u get a good connection it took me forever to firgure out why it wasnt working. .
Trending Topics
#11
TECH Apprentice
iTrader: (1)
Join Date: Aug 2005
Location: southern cali
Posts: 334
Likes: 0
Received 0 Likes
on
0 Posts
i used # 66 cuz 65 was giving me shitty readings. . u just have to make sure that ur getting a good connection. . also u have to allow the 02 sensor to heat up take it around the block or for a ride. .it should bounce from lean to rich and go rich at full thottle .. . . . --LED lighting of just the readout, not the whole gauge. (Lean - Rich) Works with most OEM and aftermarket oxygen sensors, if sensor is needed--
#14
Staging Lane
iTrader: (6)
Join Date: May 2006
Location: Michigan
Posts: 88
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Kmoore
K Im done installing it, now does the C2 air/fuel gauge supposed to light blue like the other C2's? or just the lean/rich lights
The one that lights up, will have another wire you hook to a power source, you have just the read display Gauge, which will only light up the lean/rich LED's