Wiring, Stereo & Electronics Audio Components | Radars | Alarms - and things that spark when they shouldn't

Need help with radio/amp Setup

Thread Tools
 
Search this Thread
 
Old 03-25-2008, 07:20 PM
  #1  
TECH Enthusiast
Thread Starter
iTrader: (4)
 
95TAGary's Avatar
 
Join Date: Aug 2006
Location: KY
Posts: 640
Likes: 0
Received 1 Like on 1 Post

Default Need help with radio/amp Setup

I have a problem with my amps kicking off with a loud pop when I roll up a window or turn on the headlights or plug radar detector in. I have two amps in the car and a Panasonic deck I been playing for a few years but lately I've had problems with the amp kicks off and turns back on and the volume can be low when this happens. My battery has been running down after a few days so would this be a ground problem or on the positive side? Accessary wire? I'm not sure what to look at. Looks like my player is hookup right. Where should I begin my search. I've done the wire mod but haven't had a problem there or do some of the wires run through that harness?

Open to all suggestions so I can start driving car without this happens.

Thanks
Old 03-26-2008, 05:29 AM
  #2  
TECH Enthusiast
Thread Starter
iTrader: (4)
 
95TAGary's Avatar
 
Join Date: Aug 2006
Location: KY
Posts: 640
Likes: 0
Received 1 Like on 1 Post

Default

Bump, still need help any ideas?




All times are GMT -5. The time now is 10:31 AM.