Wiring, Stereo & Electronics Audio Components | Radars | Alarms - and things that spark when they shouldn't

***** HELP*** I've Tried Searching*** Thank You!*********

Thread Tools
 
Search this Thread
 
Old 08-30-2008, 11:39 AM
  #1  
Teching In
Thread Starter
 
svrider01's Avatar
 
Join Date: Mar 2006
Posts: 9
Likes: 0
Received 0 Likes on 0 Posts
Default ***** HELP*** I've Tried Searching*** Thank You!*********

Hello. I never posted or done replies and I am getting desperate so here I am. I've tried searching for answer on this forum but the ones I found was about those custom homemade LED's.
Well I bought these on ebay: http://cgi.ebay.com/ebaymotors/98-02...spagenameZWDVW
Now my Cruise Control wont work. Took it to a Chevy Dealership and they said it's those LED's drawing current. I wrote the seller and they told me there were problems with those on some cars. So the seller wrote to the manufacturer or distributers and told them about this. I have 2001 Camaro and they have not tested them, so I have to go to Chino, CA which is about 80-90 miles. That is too far. I have to bring my car over there so they can figure out what resistors I needed.
My question is, would you know what kind of resistors I need, where to get them and how to install them? Any suggestions and comments is greatly appreciated!
Thank you.
Old 08-30-2008, 05:11 PM
  #2  
Teching In
Thread Starter
 
svrider01's Avatar
 
Join Date: Mar 2006
Posts: 9
Likes: 0
Received 0 Likes on 0 Posts
Default

The seller on ebay gave me on info where to get the resistor. http://www.superbrightleds.com/cgi-b...gi?product=CAR
and get the RL-650 taillgihts Load Resistor. Sabersport (Sai) where I bought it from has been very helpful.

Here is how to install them: http://www.superbrightleds.com/tail-brake-turn.html

I just ordered them and will let you know when I install them and see if my Cruise Control works again.
Any suggestions and concerns please post. Thank you.




All times are GMT -5. The time now is 03:49 AM.