C6 Z06 Vrs 4.8L 617HP Turbo Sierra Truck
#1
TECH Fanatic
Thread Starter
iTrader: (4)
Join Date: Dec 2009
Location: Charleston, SC
Posts: 1,497
Likes: 0
Received 0 Likes
on
0 Posts
C6 Z06 Vrs 4.8L 617HP Turbo Sierra Truck
z06 guy is a friend of mine. Was a friendly race, should be more once he gets some mods. Truck is 4700+ pounds, still has towing package installed. Untouch 4.8L other then LS6 cam/spring, MP70.
http://www.youtube.com/watch?v=QEq3J5OcDAM
Also some track footage of truck at the local 1/8th.
http://www.youtube.com/watch?v=2nUJL...eature=related
http://www.youtube.com/watch?v=QEq3J5OcDAM
Also some track footage of truck at the local 1/8th.
http://www.youtube.com/watch?v=2nUJL...eature=related
#3
Launching!
Join Date: Feb 2010
Location: Twin Falls Idaho
Posts: 264
Likes: 0
Received 0 Likes
on
0 Posts
ive got a buddy that has the exact same sierra red and all that he swapped a 6.0 in with LS6 cam and is running a T76 with meth inj. and he was pulling 11.22 @ 118 in the 1/4 @ 4500 feet launching in 4wd, those trucks are no joke turbo'd.
Trending Topics
#8
Staging Lane
Around 750 crank horsepower on the bone stock rods/pistons? Untouched bottom end you imply? Don't even think a LS2 could make that power without at least forged pistons...
Good kill, thought for sure the vette should have done better on the top end. How big was driver/passenger?
Good kill, thought for sure the vette should have done better on the top end. How big was driver/passenger?
#10
TECH Fanatic
Thread Starter
iTrader: (4)
Join Date: Dec 2009
Location: Charleston, SC
Posts: 1,497
Likes: 0
Received 0 Likes
on
0 Posts
Thanks guys. Sticks&Stones, the engine is untouched my friend with 85K on it. Has roughly 12-15k Boosted miles. Here is my build thread from where it had 238HP stock.
http://www.performancetrucks.net/for...d.php?t=463166
Killemall, it's only a single turbo, but a small one at that. 70mm/P-trim, .81 a.r t4
http://www.performancetrucks.net/for...d.php?t=463166
Killemall, it's only a single turbo, but a small one at that. 70mm/P-trim, .81 a.r t4