blackls1ta00

iTrader: (27)

my car is in the signature with 450rwhp vs stock 2012 gt500, no nitrous just motor.both races were same outcome from 30-110mph 3 honks and we are off side by side at 60mph then 80mph i sneak past by a fender.those cars run damn good stock!!( lol) i talked to the guy afterwards he said he just got it and was shipped up from south carolina awesome blue color with white stripes.he also said he has 3k worth of mods going onto the car soon,i said we will meet again.next time im hoping to have a passenger to get a video of the race and ill be spraying a 150 shot.

HioSSilver

iTrader: (8)

Any track times on your car?

blackls1ta00

iTrader: (27)

not yet im waiting to get a new 9 inch rearend.

R6cowboy

iTrader: (3)

Nice kill. I'm going to look it up now anyways, but what are the specs on the 2012 GT500?

big hammer

mustangs are rated in the term % of mach1. in this case a 2012 gt500 would be about 59% of mach1.

ohioborn80

iTrader: (2)

550hp and about 3800lbs.



Nice kill.

ScreaminRedZ

iTrader: (3)

Good kill! Those cars are no joke when driven well.

They are rated 550 hp (I believe they dyno 480+) and I think 2011+ had the aluminum block and weighed 75-100lbs less than the early GT500's.

ohioborn80

iTrader: (2)

correct

1_MEANZ28

iTrader: (4)

good kill.post up the remach

HioSSilver

iTrader: (8)

Why wait?? Go run that bitch, I'm still on the 10bolt and have went 11.1 on multiple occasions.....and breaking 2 times. But parts are cheap cause no one wants them.

blackls1ta00

iTrader: (27)

thanks guys! he was a good driver and i was giving it hell lol.id rather wait to get the new rear in before spraying it that way ill have better tires also,this is my 2nd 10 bolt and its on its way out soon lol.

bamaballa205

iTrader: (12)

Good Kill. The 10bolt will handle that 150 shot from a roll. Well at least mine does.......

blackls1ta00

iTrader: (27)

thanks.i have a set of mt drag radials but im affraid if i put them on it will break for sure lol

R6cowboy

iTrader: (3)

Is it the 2011+ GT500's that received a new engine based off the coyote platform which replaced the old 5.4L DOHC motor? Or is it the 2013 model with the huge bump in power?

Just seen the 2013 has a 5.8L. But is it a new engine platform or just an increased displacement of the previous 5.4L aluminum engine?

ScreaminRedZ

iTrader: (3)

Pretty sure it's an updated version of the 5.4, but don't quote me. Has a 2.3 TVS I believe.

blackls1ta00

iTrader: (27)

its a hell of a car!! no doubt ford did their homework, but for 50k plus no thanks!!

BadAzzStang

13 has the TVS, reworked 5.4 to 5.8L. They improved the cooling i know for sure to handle the power.

11-12 had 5.4 but was aluminum block not cast iron like the earlier models.

R6cowboy

iTrader: (3)

Did a quick search and you're right on SRZ. New 5.8L is an updated 5.4L from the previous year GT500. Same aluminum block, increased bore, cylinder heads have increased coolant flow, uses same cams from the Ford GT, piston-cooling oil jets similar to those in the 5.0 coyote, increased redline to 7k, increased compression to 9.0:1 from 8.5:1 and uses the 2.3 TVS blower.