Turbo Festiva vs Mustangs
#1
Teching In
Thread Starter
Join Date: Mar 2011
Location: Bay Area
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
Turbo Festiva vs Mustangs
Went out on a cruise over to the local In-n-out. Small baby races but I would have pulled them even harder if it was a whole race. Sorry no vids, it's not cool risking my friends lives.
96' Saleen Mustang( PI intake, bbk throttle body, CAI, x pipe, sct tune). He started in 2nd while I started in 3rd, he kept up for a second then I proceed initiate freight training him and let off. He then proceeded to flip me off.
05'-09' 3V GT(stock I think but had cool body). 50 roll, he started in 2nd and again I started in 3rd, I was brake boosting waiting for the honks. Third honk and I just start pulling. He said he never went into 3rd.
Nothing too cool but races none the less.
One more from the other day. 3.8 V6 Mustang from a dig. We launch and I spin and then I miss second (my shifter linkage was too short so the 2,4,R gears were hard to get into). As soon as i'm done spinning and swerving left to right I start pulling hard and then a wild stop light appears...
96' Saleen Mustang( PI intake, bbk throttle body, CAI, x pipe, sct tune). He started in 2nd while I started in 3rd, he kept up for a second then I proceed initiate freight training him and let off. He then proceeded to flip me off.
05'-09' 3V GT(stock I think but had cool body). 50 roll, he started in 2nd and again I started in 3rd, I was brake boosting waiting for the honks. Third honk and I just start pulling. He said he never went into 3rd.
Nothing too cool but races none the less.
One more from the other day. 3.8 V6 Mustang from a dig. We launch and I spin and then I miss second (my shifter linkage was too short so the 2,4,R gears were hard to get into). As soon as i'm done spinning and swerving left to right I start pulling hard and then a wild stop light appears...
#3
Teching In
Join Date: Jan 2004
Location: San Antonio, TX
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
One more from the other day. 3.8 V6 Mustang from a dig. We launch and I spin and then I miss second (my shifter linkage was too short so the 2,4,R gears were hard to get into). As soon as i'm done spinning and swerving left to right I start pulling hard and then a wild stop light appears...
#4
#5
Teching In
Thread Starter
Join Date: Mar 2011
Location: Bay Area
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
#10
Staging Lane
Join Date: Jun 2012
Location: Patchogue,New York
Posts: 56
Likes: 0
Received 0 Likes
on
0 Posts
One more from the other day. 3.8 V6 Mustang from a dig. We launch and I spin and then I miss second (my shifter linkage was too short so the 2,4,R gears were hard to get into). As soon as i'm done spinning and swerving left to right I start pulling hard and then a wild stop light appears...
#13
Teching In
Thread Starter
Join Date: Mar 2011
Location: Bay Area
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
I can't just order things from a catalog like you can for your car pony boy.
#14
It's tougher making a 4cyl fast than it is a V8 and its less expensive to boot. Good job and keep building. I like how people hate on a vehicle if its not a V8. Especially the cocky 5th Gen owners.
#16
There is one rolling around my area, I think it's a 2.8 escort gt swap and boosted, 8 to 10 psi, and that little **** is fast, good kill and keep up the work, I'm always impressed by a car like that!
#18
Teching In
Thread Starter
Join Date: Mar 2011
Location: Bay Area
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts