Turbo Integra vs 403 Stroker T/A
#22
That was also with a fast intake and 90mm throttle body lol that helped a little. With the th400 it trapped 118 with a 11.3 but it does have 4l60 now.should it should be up a little. The integ is fast as Bell though, we will see how it does at the track
#23
Teching In
Thread Starter
Join Date: Sep 2010
Location: Indianapolis Area
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Maybe I can borrow some slicks and break some axles
#26
Teching In
Thread Starter
Join Date: Sep 2010
Location: Indianapolis Area
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
#28
Teching In
Thread Starter
Join Date: Sep 2010
Location: Indianapolis Area
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
#29
FormerVendor
iTrader: (12)
I wish we could. But something happend with my car a few weeks ago and the crank case got filled with E85 and washed the bearings out. Im not sure if I lost an injector or what happend. I'm trying to decided what my next step is going to be. Its looking like I might sell the corvette as a rolling chassis to a friend rebuild my LS7 and put it in my 2000 SS. So the rematch might have to wait till next spring. Have you ran Jason's GTR lately? We were always tied door to door when we raced. So that will give you an idea where we would have been.
#30
Teching In
Thread Starter
Join Date: Sep 2010
Location: Indianapolis Area
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Oh man, thats really shitty, and interesting too. You guys were one of the closest races I've seen on the street and the track!
I've raced him a few times. The last time I raced him on 20lbs of boost in 3rd gear, I stayed right next to him spinning, then I shifted to 4th and he gained a car and stayed there.
Now I have decent tire up front and turned up the boost in 3rd to 24 and it hooks and goes like this video shows. So him and I should be very close.
I've raced him a few times. The last time I raced him on 20lbs of boost in 3rd gear, I stayed right next to him spinning, then I shifted to 4th and he gained a car and stayed there.
Now I have decent tire up front and turned up the boost in 3rd to 24 and it hooks and goes like this video shows. So him and I should be very close.
#38
TECH Fanatic
iTrader: (6)
Join Date: Sep 2008
Location: DSM
Posts: 1,433
Likes: 0
Received 0 Likes
on
0 Posts
I wish we could. But something happend with my car a few weeks ago and the crank case got filled with E85 and washed the bearings out. Im not sure if I lost an injector or what happend. I'm trying to decided what my next step is going to be. Its looking like I might sell the corvette as a rolling chassis to a friend rebuild my LS7 and put it in my 2000 SS. So the rematch might have to wait till next spring. Have you ran Jason's GTR lately? We were always tied door to door when we raced. So that will give you an idea where we would have been.
Best of luck with next build
What would a rolling chassis C6Z go for anyways?
#40
Umm the goat is the dd and a turf and no it didn't get beat by the vette, I was just watching the race and didn't downshift...... I later raced the camaro that was even with the vette and beat it.