H/C/I Camaro vs Cammed LS3
#1
Teching In
Thread Starter
Join Date: Sep 2012
Location: Mooresville, NC
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
H/C/I Camaro vs Cammed LS3
Buddy just got an '02 SS with H/C/I and wanted to see how it runs. Old catfish still has it. https://www.youtube.com/watch?v=IIIC...ature=youtu.be
#3
Teching In
Thread Starter
Join Date: Sep 2012
Location: Mooresville, NC
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
#5
Teching In
Thread Starter
Join Date: Sep 2012
Location: Mooresville, NC
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
#7
Teching In
Thread Starter
Join Date: Sep 2012
Location: Mooresville, NC
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
#14
Staging Lane
Dude he's got LS3 heads. So should he pull them off and put on worse heads so that he can say he has "decent heads"? Seriously man, you gotta dig deep to find more then a couple heads that can outperform LS3 heads on a stock cubic inch LS3.
#15
TECH Senior Member
iTrader: (2)
Join Date: Aug 2012
Location: Howell & Fenton MI
Posts: 11,145
Likes: 0
Received 15 Likes
on
15 Posts
Sorry i have to dissagree with that. Even though a stock LS3 head flows very well, there are several ported heads out there that will out flow it. Some by very little and some by a pretty decent amount
#18
Teching In
Thread Starter
Join Date: Sep 2012
Location: Mooresville, NC
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
No definte numbers on either car, guy who sold the camaro said he believes it was 460ish, and the vette should be 480 or so
Might get that video this weekend actually.
Might get that video this weekend actually.