tondss(MR_president )turbo camaro Vs ninetres turbo camaro
#1
10 Second Club
Thread Starter
iTrader: (38)
Join Date: Jan 2005
Location: Fresno, CA
Posts: 1,411
Likes: 0
Received 0 Likes
on
0 Posts
tondss(MR_president )turbo camaro Vs ninetres turbo camaro
cars both are turbo frount mount T76 exact builds, stock bottom end both on street tires, built by the same guy.
ninetre's car makes 650 at 5800 rpms at 10 psi however his limiter is set at 5500 due to his fuel pumps giving causing the car to lean out.
he has a t56 and 10 bolt 4:10 gears weight 3350 with driver
The last time i dynod though a t56 and 9 inch i made 550 @ 8psi . i now have a th400 and have not dynod since.
th400 and 9 inch 3:50 gears roll cage weight 3600 with driver
http://media.putfile.com/turbo-camaros
ninetre's car makes 650 at 5800 rpms at 10 psi however his limiter is set at 5500 due to his fuel pumps giving causing the car to lean out.
he has a t56 and 10 bolt 4:10 gears weight 3350 with driver
The last time i dynod though a t56 and 9 inch i made 550 @ 8psi . i now have a th400 and have not dynod since.
th400 and 9 inch 3:50 gears roll cage weight 3600 with driver
http://media.putfile.com/turbo-camaros
Last edited by Mr_president; 11-16-2006 at 03:48 AM.
Trending Topics
#8
10 Second Club
Thread Starter
iTrader: (38)
Join Date: Jan 2005
Location: Fresno, CA
Posts: 1,411
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by SDB
So, two hillbillies race for about 3 seconds on the highway????
I'd race both these cars on motor!
I'd race both these cars on motor!
by the way far from hillbilly! it was a joke if you didnt get it. youll get shnapped off just like everyone else who talks ****!
Originally Posted by VENGEANCE
And you would lose to both of those cars on motor.
there were alot of things said that pissed my buddy off in the last one , and a bunch of non sence... so we wanted to start fresh......
#10
Originally Posted by Mr_president
let me know when your in california buddy ill show you what my car does on 18 psi...... that was on 8.5 psi 10.60s all day on 8.5 psi come get it!
by the way far from hillbilly! it was a joke if you didnt get it. youll get shnapped off just like everyone else who talks ****!
there were alot of things said that pissed my buddy off in the last one , and a bunch of non sence... so we wanted to start fresh......
by the way far from hillbilly! it was a joke if you didnt get it. youll get shnapped off just like everyone else who talks ****!
there were alot of things said that pissed my buddy off in the last one , and a bunch of non sence... so we wanted to start fresh......
SDB
#12
what does the M6 one run at the track?
on the 10.6 pass was that 128 mph? What cubes are the motors?
I am thinking of doing a C5 with turbo as next project....346, APS TT, and auto. What kind of stall in the TH400?
SDB
on the 10.6 pass was that 128 mph? What cubes are the motors?
I am thinking of doing a C5 with turbo as next project....346, APS TT, and auto. What kind of stall in the TH400?
SDB
#13
Administrator
Originally Posted by Mr_president
there were alot of things said that pissed my buddy off in the last one , and a bunch of non sence... so we wanted to start fresh......
#14
10 Second Club
Thread Starter
iTrader: (38)
Join Date: Jan 2005
Location: Fresno, CA
Posts: 1,411
Likes: 0
Received 0 Likes
on
0 Posts
10.6 was @ 119 ...never got to see what it would do at 128....stock motor, in the process of building a motor got the pistons rods and crank need a little more scratch...3600 stall..
the m6 car has yet to go to the track. he need to put the 9 inch in.
the m6 car has yet to go to the track. he need to put the 9 inch in.