AChotrod

iTrader: (17)

I need to know if there is anyone making a DS safety loop that will work with a True Dual set up with a X-pipe???
Thanks a ton
Mike

Joey@Tick

iTrader: (20)

Spohn's will work - I ran it with my TSP True Duals.

http://www.tick-performance.com/cata...y/chassis/#dsl

AChotrod

iTrader: (17)

Sweet Thats exacty what I was looking for!!!! Thanks!!!!

toothdoc

iTrader: (7)

Does that one go on without dropping the driveshaft?

AChotrod

iTrader: (17)

Looks like it would. But taking out the DS is so easy, even a caveman can do it!!

SmokedOutZ28

iTrader: (35)

Do you have pictures of it installed with the true duals?

quickta

iTrader: (5)

I have the TSP true duals on my '00 WS6 and tried a Lakewood safety loop and it didn't fit, the Spohn safety loop looks like its built the same as the Lakewood

Low N Slow

iTrader: (4)

I don't have TD but I have the Jegs loop and it tucks up really tight. Only about $40 too.

AChotrod

iTrader: (17)

What exactly didnt fit?? Usually TDs dont tuck up at all and that the Lakewood and Jegs DS loop look pretty flat across the bottom?

StealthFormula

iTrader: (35)

I'd like to know as well because I really need to get one.

BlackBADaSS02

iTrader: (17)

I had the Lakewood DS loop and TSP TD's, and it fit without any problems.

67camaro

iTrader: (28)

I think these guys offer a few different options:

http://www.midwestchassis.com/

quickta

iTrader: (5)

here is a picture of my exhaust and could not get the Lakewood on, where it comes out from the mounts it hits the pipes

quickta

iTrader: (5)

another picture, does any one else TSP true duals exhaust look like this, could it be to close and not letting the safety loop to go on

ssvert99

iTrader: (26)

i do have a crossmember with a loop specific to the TSP duals. it is designed for the tunnel mounted torque arm that we manufacture. i will soon be releasing a tunnel form fitting loop for just about any configuration that should work for everybody.

quickta

iTrader: (5)

I will definitely get a tunnel form fitting loop when you get it ready, pm me it you can when it is ready, by chance what will it run