ElkyRacer

iTrader: (5)

Ive got a set of OLD(were talking 99-00) BMR boxed tube weld on subframe connectors that I got from a friend of mine who had them in his attic for years and never used. I need to get them put on the car but he no longer has the hardware. What size bolts are used for the front LCA mounts, with the SFCs? The stock bolts arent long enough.

Thanks.

UMI Performance

iTrader: (77)

We supply 12mm x 100mm bolts with ours... they should work fine with the BMR ones as well. A 1/2" x 4" might work too but may be a tight fit

Hope that helps,
Ryan

BMR Tech2

iTrader: (5)

Hello, yes ryan is correct those will work fine.

ElkyRacer

iTrader: (5)

Thanks a million! Im sure the orig owner will be happy to see these put on a car, instead of being moved from house to house for the past 8 years!

BMR Tech2

iTrader: (5)

Good luck. You will be really happy that you put them on. Its an easy install but if you have any questions give me a call.