bmr springs and heater hose mod
04-25-2009, 04:51 PM
#1
TECH Regular
Thread Starter
iTrader: (19)
Join Date: Apr 2007
Location: longbeach CA
Posts: 487
Likes: 0
Received 0 Likes
on
0 Posts
bmr springs and heater hose mod ok guys who has done these to mods together
i have a set of bmr springs i havent installed yet
my car has the heater hose mod already and i lost the isolaters
should i invest in some new ones
i have a set of bmr springs i havent installed yet
my car has the heater hose mod already and i lost the isolaters
should i invest in some new ones
04-25-2009, 07:06 PM
#2
I have 17x11 wheels back there with bmr springs. for what ever reason one side sits lower than the other. I have the isolators in but I think im going to have to do a hose mod for passenger side cause it rubs pretty bad when I hit a bump.
mabe its just my car !!! IDK
mabe its just my car !!! IDK
04-29-2009, 09:28 PM
#5
Moderator
iTrader: (11)
Join Date: Mar 2002
Location: East Central Florida
Posts: 12,605
Likes: 0
Received 6 Likes
on
6 Posts
You may like the rake and the ride quality with the BMR
springs on the front, but keeping hose-mod stock springs
in the rear. I found the Hotchkiss rears a bit harsh for
my liking as well as too drag-*** looking (despite an
even, as-advertised -1" all around, by the tape).
Since the rears are a simple driveway job, give it a try
with just the fronts swapped first and see.
springs on the front, but keeping hose-mod stock springs
in the rear. I found the Hotchkiss rears a bit harsh for
my liking as well as too drag-*** looking (despite an
even, as-advertised -1" all around, by the tape).
Since the rears are a simple driveway job, give it a try
with just the fronts swapped first and see.
