Tommyv8

iTrader: (8)

I've heard of this problem with rod/poly and rod/rod panhards, but this has poly bushings at both ends. The clunk is coming from the chassis (passenger) side whenever I hit a bump, stop suddenly, or even just climb into the car. At one point I crawled under there and tightened the bolts and adjusting nut; that made it a little quieter for a while but the clunk is still there and is getting louder. It's been doing it ever since I installed it a few weeks ago. What am I doing wrong?

gjohnsonws6

iTrader: (12)

E brake cable tied up at LH side?

UMI Performance

iTrader: (77)

Did you put grease on the outside surfaces of the bushings before installing the panhard bar?

99Bluz28

iTrader: (35)

The factory mount bolts are tapered(smaller) on the nut end, so you end up with some play on that end of the bolts since the bushing sleeve isn't tapered.