how to get the sportline look..w/out using sportlines
01-21-2010, 12:17 PM
#3
TECH Junkie
iTrader: (5)
Join Date: Feb 2007
Location: Key West, Florida
Posts: 3,183
Likes: 0
Received 0 Likes
on
0 Posts
what is it about the sportlines you don't want.
you could try fabricating the lower shock mount so that its lower. but you'd have to be pretty good with a cutter and welding
you could try fabricating the lower shock mount so that its lower. but you'd have to be pretty good with a cutter and welding
01-21-2010, 01:09 PM
#4
Um... no. Less travel is less travel. And if you drop it and don't add a lot of spring rate to counter the drop--it's even worse. Sportlines are too low and too soft both.
__________________
www.stranoparts.com --814-849-3450
18 SCCA National Championships in house, many more for our customers prove we know our stuff.Talk is cheap, results matter.
Check out our KONI prices, our Master Cylinder Brace, and new Xtracker Hub/wheel bearing upgrade kits!
www.stranoparts.com --814-849-3450
18 SCCA National Championships in house, many more for our customers prove we know our stuff.Talk is cheap, results matter.
Check out our KONI prices, our Master Cylinder Brace, and new Xtracker Hub/wheel bearing upgrade kits!
